Datasheet4U Logo Datasheet4U.com

SN74LS247 - BCD-to-Seven-Segment Decoders/Drivers

Features

  • a lamp test input and have full ripple-blanking input/output controls. An automatic leading and/or trailing-edge zero-blanking control (RBI and RBO) is incorporated and an overriding blanking input (BI) is contained which may be used to control the lamp intensity by pulsing or to inhibit the output’s lamp test may be performed at any time when the BI/RBO node is at high level. Segment identification and resultant displays are shown below. Display pattern for BCD input counts above 9 are unique s.

📥 Download Datasheet

Datasheet preview – SN74LS247

Datasheet Details

Part number SN74LS247
Manufacturer ON Semiconductor
File Size 198.04 KB
Description BCD-to-Seven-Segment Decoders/Drivers
Datasheet download datasheet SN74LS247 Datasheet
Additional preview pages of the SN74LS247 datasheet.

📁 Similar Datasheet

  • SN74LS247 - BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS (Motorola)
  • SN74LS240 - OCTAL BUFFER/LINE DRIVER (Motorola)
  • SN74LS240 - Octal Buffers and Line Drivers (Texas Instruments)
  • SN74LS241 - OCTAL BUFFER/LINE DRIVER (Motorola)
  • SN74LS241 - Octal Buffers and Line Drivers (Texas Instruments)
  • SN74LS242 - QUAD BUS TRANSCEIVER (Motorola)
  • SN74LS243 - QUAD BUS TRANSCEIVER (Motorola)
  • SN74LS243 - QUADRUPLE BUS TRANSCEIVERS (Texas Instruments)
  • SN74LS244 - OCTAL BUFFER/LINE DRIVER (Motorola)
  • SN74LS244 - Octal Buffers and Line Drivers (Texas Instruments)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
SN74LS247 BCD−to−Seven−Segment Decoders/Drivers The SN74LS247 is a BCD-to-Seven-Segment Decoder/Drivers. The LS247 composes the and with the tails. The LS247 has active-low outputs for direct drive of indicators. The LS247 features a lamp test input and have full ripple-blanking input/output controls. An automatic leading and/or trailing-edge zero-blanking control (RBI and RBO) is incorporated and an overriding blanking input (BI) is contained which may be used to control the lamp intensity by pulsing or to inhibit the output’s lamp test may be performed at any time when the BI/RBO node is at high level. Segment identification and resultant displays are shown below. Display pattern for BCD input counts above 9 are unique symbols to authenticate input conditions.
Published: |