Datasheet4U Logo Datasheet4U.com

NV25160LV - EEPROM

Download the NV25160LV datasheet PDF. This datasheet also covers the NV25080LV variant, as both devices belong to the same eeprom family and are provided as variant models within a single manufacturer datasheet.

Description

NV25080LV, NV25160LV, NV25320LV, NV25640LV are a EEPROM Serial 8/16/32/64

Kb SPI Low Voltage Automotive Grade 1 devices internally organized as 1K/2K/4K/8Kx8 bits.

Features

  • a 32 byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On.
  • Chip ECC (Error Correction Cod.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NV25080LV-ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
NV20FP G-LOW CURRENT HIGH VOLTAGE RECTIFIERS HV Component Associates
NV231 light weight DB Lectro
NV2M light weight DB Lectro

Other Datasheets by onsemi

Part Number Description
NV25160 EEPROM
NV25160MUW EEPROM
NV25160WF EEPROM
NV25128 EEPROM
NV25128MUW EEPROM

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com EEPROM Serial 8/16/32/64-Kb SPI Low Voltage Automotive Grade 1 SOIC−8 DW SUFFIX CASE 751BD TSSOP−8 DT SUFFIX CASE 948AL 1 UDFN8 MUW3 SUFFIX CASE 517DH NV25080LV, NV25160LV, NV25320LV, NV25640LV Description NV25080LV, NV25160LV, NV25320LV, NV25640LV are a EEPROM Serial 8/16/32/64−Kb SPI Low Voltage Automotive Grade 1 devices internally organized as 1K/2K/4K/8Kx8 bits. It features a 32 byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device.
Published: |