Datasheet4U Logo Datasheet4U.com

NSI50150ADT4G - Adjustable Constant Current Regulator & LED Driver

Features

  • Robust Power Package: 4.2 Watts.
  • Adjustable up to 350 mA.
  • Wide Operating Voltage Range.
  • Immediate Turn-On.
  • Voltage Surge Suppressing.
  • Protecting LEDs.
  • UL94.
  • V0 Certified.
  • SBT (Self.
  • Biased Transistor) Technology.
  • Negative Temperature Coefficient.
  • Eliminates Additional Regulation.
  • NSV Prefix for Automotive and Other.

📥 Download Datasheet

Datasheet Details

Part number NSI50150ADT4G
Manufacturer onsemi
File Size 304.69 KB
Description Adjustable Constant Current Regulator & LED Driver
Datasheet download datasheet NSI50150ADT4G Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NSI1000 1024 x 32 Resolution CMOS Image Sensor Newsight Imaging
NSI1042 Isolated CAN Transceiver NOVOSENSE
NSI1042-Q1 Isolated CAN Transceiver NOVOSENSE
NSI1042C Isolated CAN Transceiver NOVOSENSE
NSi1050 Isolated CAN Transceiver NOVOSENSE

Other Datasheets by onsemi

Part Number Description
NSI50010YT1G Constant Current Regulator & LED Driver
NSI50350ADT4G Constant Current Regulator & LED Driver
NSI50350AST3G Constant Current Regulator & LED Driver
NSI45015WT1G Constant Current Regulator & LED Driver
NSI45020AT1G Constant Current Regulator & LED Driver

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Adjustable Constant Current Regulator & LED Driver 50 V, 150 − 350 mA + 10%, 4.2 W Package NSI50150ADT4G The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective solution for regulating current in LEDs. The CCR is based on Self-Biased Transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The CCR turns on immediately and is at 14% of regulation with only 0.5 V Vak. The Radj pin allows Ireg(SS) to be adjusted to higher currents by attaching a resistor between Radj (Pin 3) and the Cathode (Pin 4).
Published: |