Datasheet4U Logo Datasheet4U.com

NCV8730 - LDO Regulator

Datasheet Summary

Description

TSOP

Pin No.

Power supply input pin.

Ground pin.

enabled, low

disabled).

up resistor is not require

Features

  • very low quiescent current, fast transient response and high input and output voltage ranges. The NCV8730 is CMOS LDO regulator designed for up to 38 V input voltage and 150 mA output current. Quiescent current of only 1 mA makes this device ideal solution for battery.
  • powered, always.
  • on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output vol.

📥 Download Datasheet

Datasheet preview – NCV8730

Datasheet Details

Part number NCV8730
Manufacturer ON Semiconductor
File Size 6.15 MB
Description LDO Regulator
Datasheet download datasheet NCV8730 Datasheet
Additional preview pages of the NCV8730 datasheet.

📁 Similar Datasheet

  • NCV8184 - Tracking Regulator/Line Driver (ON)
  • NCV8501 - LDO Linear Regulators (ON)
  • NCV8502 - LDO Linear Regulators (ON)
  • NCV896530 - Buck Converter (ON Semiconducto)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
LDO Regulator, 150 mA, 38 V, 1 mA IQ, with PG NCV8730 The NCV8730 device is based on unique combination of features − very low quiescent current, fast transient response and high input and output voltage ranges. The NCV8730 is CMOS LDO regulator designed for up to 38 V input voltage and 150 mA output current. Quiescent current of only 1 mA makes this device ideal solution for battery− powered, always−on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit and over temperature protections saves the device against overload conditions.
Published: |