Datasheet4U Logo Datasheet4U.com

NCV8675 - Linear Regulator

Description

Unregulated Input Voltage; 4.5 V to 45 V; Battery Input Voltage.

Bypass to GND with a Ceramic Capacitor.

Features

  • Features.
  • 5 V and 3.3 V Fixed Output (2.5 V Version Available Upon Request).
  • ±2.0% or ±2.5% Output Accuracy, Over Full Temperature Range.
  • 34 mA Typical Quiescent Current at Iout = 100 mA, 50 mA Maximum up to 85°C.
  • 600 mV Maximum Dropout Voltage at 350 mA Load Current.
  • Wide Input Voltage Operating Range of 4.5 V to 45 V.
  • Internal Fault Protection.
  • 42 V Reverse Voltage.
  • Short Circuit/Overcurrent.
  • Thermal Ove.

📥 Download Datasheet

Datasheet Details

Part number NCV8675
Manufacturer onsemi
File Size 207.41 KB
Description Linear Regulator
Datasheet download datasheet NCV8675 Datasheet

📁 Similar Datasheet

  • NCV8184 - Tracking Regulator/Line Driver (ON)
  • NCV8501 - LDO Linear Regulators (ON)
  • NCV8502 - LDO Linear Regulators (ON)
  • NCV896530 - Buck Converter (ON Semiconducto)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
Other Datasheets by ON Semiconductor
  • NCV8674 - Low Dropout Linear Regulator
  • NCV8603 - LDO Regulator
  • NCV8605 - CMOS LDO Regulator
  • NCV8606 - CMOS LDO Regulator
  • NCV8612 - multiple output linear regulator
  • NCV8613 - multiple output linear regulator
  • NCV8614 - multiple output linear regulator
  • NCV8614B - multiple output linear regulator

Full PDF Text Transcription

Click to expand full text
NCV8675 Linear Regulator - Low Dropout, Very Low Iq, Reset, Reset Delay 350 mA The NCV8675 is a precision 5.0 V and 3.3 V fixed output, low dropout integrated voltage regulator with an output current capability of 350 mA. Careful management of light load current consumption, combined with a low leakage process, achieve a typical quiescent ground current of 34 mA. NCV8675 is pin for pin compatible with NCV4275 and it could replace this part when very low quiescent current is required. The output voltage is accurate within ±2.0% for D2PAK−5 package and ±2.5% for DPAK−5 package, and maximum dropout voltage is 600 mV at full rated load current. It is internally protected against input transients, input supply reversal, output overcurrent faults, and excess die temperature.
Published: |