Datasheet4U Logo Datasheet4U.com

NCV84045 - High Side Driver

Datasheet Summary

Description

Pin # Symbol Description 1 IN Logic Level Input 2 CS_EN Current Sense Enable 3 GND Ground 4 CS Analog Current Sense Output 5 VD Supply Voltage 6 OUT Output 7 OUT Output 8 VD Supply Voltage OUT www.onsemi.com 2 NCV84045 VD VIN ID IIN VD IN ICS ICS_EN CS CS_EN IOU

Features

  • such as active inrush current management, over.
  • temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated Current Sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection. An active high Current Sense Enable pin allows all diagnostic and current sense features to be enabled. Features.
  • Short Circuit Protection with Inrush Current Manageme.

📥 Download Datasheet

Datasheet preview – NCV84045

Datasheet Details

Part number NCV84045
Manufacturer ON Semiconductor
File Size 341.92 KB
Description High Side Driver
Datasheet download datasheet NCV84045 Datasheet
Additional preview pages of the NCV84045 datasheet.

📁 Similar Datasheet

  • NCV8184 - Tracking Regulator/Line Driver (ON)
  • NCV8501 - LDO Linear Regulators (ON)
  • NCV8502 - LDO Linear Regulators (ON)
  • NCV896530 - Buck Converter (ON Semiconducto)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
Other Datasheets by ON Semiconductor
  • NCV8401A - Self-Protected Low-Side Driver
  • NCV8401B - Self-Protected Low-Side Driver
  • NCV8402 - Self-Protected Low Side Driver
  • NCV8402A - Self-Protected Low Side Driver
  • NCV8402AD - Dual Self-Protected Low-Side Driver
  • NCV8402D - Dual Self-Protected Low-Side Driver
  • NCV8403A - Self-Protected Low-Side Driver
  • NCV8403B - Self-Protected Low-Side Driver

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Self Protected Very Low Iq High Side Driver with Analog Current Sense NCV84045 The NCV84045 is a fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over−temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated Current Sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection. An active high Current Sense Enable pin allows all diagnostic and current sense features to be enabled.
Published: |