NCV7729 Datasheet PDF (8A H-Bridge Driver) | Download ON Semiconductor NCV7729

NCV7729 - 8A H-Bridge Driver

Description

AGND Analog Ground; Device Substrate.

SCLK Serial Clock.

Features

Operating VS Battery Supply Voltage 5 V to 28 V.
Operating VCC Supply Voltage 3.0 to 5.5 V.
18 V Survivability on VCC and All Logic I/O Pins.
Typical RDS(on) = 150 mW, RDS(MAX) = 300 mW (150°C).
Continuous DC Load Current 5A (TC < 100°C).
Selectable Output Current Limitation (2.5 A to 9.6 A).
Output Switching Frequency Up to 30 kHz.
Monitoring of All Supply Voltages, Safe Power.
up State.
Loss of GND Detecti.

Datasheet Details

Part number	NCV7729
Manufacturer	ON Semiconductor
File Size	210.92 KB
Description	8A H-Bridge Driver
Datasheet	NCV7729 Datasheet
Additional preview pages of the NCV7729 datasheet.

📁 Similar Datasheet

NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)

NCV70628 - Micro-stepping Motor Driver (onsemi)

NCV7383 - Transceiver (ON Semiconducto)

NCV7410 - Automotive Ethernet Transceiver (onsemi)

NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)

NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)

NCV78514 - 1-Channel Automotive LED Driver (onsemi)

NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)

NCV2902 - Single Supply Quad Operational Amplifiers (ON)

NCV3025833 - Smart Power Stage (onsemi)

Full PDF Text Transcription

Click to expand full text

NCV7729 8 A H-Bridge Driver The NCV7729 is an intelligent, fully protected H−Bridge Driver designed specifically for control of DC and stepper motors in safety critical applications under automotive/industrial environment. Features • Operating VS Battery Supply Voltage 5 V to 28 V • Operating VCC Supply Voltage 3.0 to 5.5 V • 18 V Survivability on VCC and All Logic I/O Pins • Typical RDS(on) = 150 mW, RDS(MAX) = 300 mW (150°C) • Continuous DC Load Current 5A (TC < 100°C) • Selectable Output Current Limitation (2.5 A to 9.

Published: Jun 29, 2010 |