Datasheet4U Logo Datasheet4U.com

NCV7708F - Double Hex Driver

Description

Pin No.

24 SOIC

OUTL5 Output Low Side 5.

Open drain output driver with internal reverse diode.

OUTH5 Output High Side 5.

Features

  • Ultra Low Quiescent Current Sleep Mode.
  • Six Independent High.
  • Side and Six independent Low.
  • Side Drivers.
  • Integrated Freewheeling Protection (LS and HS).
  • Internal Upper and Lower Clamp Diodes.
  • Configurable as H.
  • Bridge Drivers.
  • RDS(on) = 0.6 W (typ).
  • 5 MHz SPI Control.
  • SPI Valid Frame Detection.
  • Compliance with 5 V and 3.3 V Systems.
  • Overvoltage Lockout.
  • Undervoltage Lockout.

📥 Download Datasheet

Datasheet Details

Part number NCV7708F
Manufacturer onsemi
File Size 324.05 KB
Description Double Hex Driver
Datasheet download datasheet NCV7708F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7719 Octal Half-Bridge Driver ON Semiconducto
NCV70628 Micro-stepping Motor Driver onsemi
NCV7383 Transceiver ON Semiconducto
NCV7410 Automotive Ethernet Transceiver onsemi
NCV7424 Four Channel LIN Transceiver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV7708 Double Hex Driver
NCV7708A Double Hex Driver
NCV7708B Double Hex Driver
NCV7708E Double Hex Driver
NCV7701 H-Bridge Driver

Full PDF Text Transcription

Click to expand full text
Double Hex Driver NCV7708F The NCV7708F is a fully protected Hex Half Bridge Driver designed specifically for automotive and industrial motion control applications. The six low and high side drivers are freely configurable and can be controlled separately. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states. The drivers are controlled via a standard SPI interface. Features • Ultra Low Quiescent Current Sleep Mode • Six Independent High−Side and Six independent Low−Side Drivers • Integrated Freewheeling Protection (LS and HS) • Internal Upper and Lower Clamp Diodes • Configurable as H−Bridge Drivers • RDS(on) = 0.6 W (typ) • 5 MHz SPI Control • SPI Valid Frame Detection • Compliance with 5 V and 3.
Published: |