Datasheet4U Logo Datasheet4U.com

NCV7356 - Single Wire CAN Transceiver

Datasheet Summary

Description

SOIC 8 SOIC

1 2 TxD Transmit data from microprocessor to CAN.

Operating mode select input 0.

Operating mode select input 1.

Features

  • undervoltage lockout, timeout for faulty blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current. The device is compliant with GMW3089V2.4 General Motors Corporation specification. Features.
  • Fully Compatible with J2411 Single Wire CAN Specification.
  • 60 mA (max) Sleep Mode Current.
  • Operating Voltage Range 5.0 to 27 V.
  • Up to 100 kbps High.
  • Speed Transmission Mode.
  • Up to 40 kbps Bus Speed.
  • Sele.

📥 Download Datasheet

Datasheet preview – NCV7356

Datasheet Details

Part number NCV7356
Manufacturer ON Semiconductor
File Size 202.47 KB
Description Single Wire CAN Transceiver
Datasheet download datasheet NCV7356 Datasheet
Additional preview pages of the NCV7356 datasheet.

📁 Similar Datasheet

  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor
  • NCV7351 - High Speed CAN Transceiver
  • NCV7351F - High Speed CAN Transceiver
  • NCV7357 - CAN FD Transceiver
  • NCV7321 - Stand Alone LIN Transceiver
  • NCV7340 - High Speed Low Power CAN Transceiver
  • NCV7341 - High Speed Low Power CAN Transceiver
  • NCV7342 - High Speed Low Power CAN Transceiver
  • NCV7343 - CAN FD Transceiver

Full PDF Text Transcription

Click to expand full text
NCV7356 Single Wire CAN Transceiver The NCV7356 is a physical layer device for a single wire data link capable of operating with various Carrier Sense Multiple Access with Collision Resolution (CSMA/CR) protocols such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices which use the network. The network shall be able to operate in either the normal data rate mode or a high−speed data download mode for assembly line and service data transfer operations.
Published: |