NCV7240B Datasheet PDF (Octal Low-Side Relay Driver) | Download ON Semiconductor NCV7240B

NCV7240B - Octal Low-Side Relay Driver

Download the NCV7240B datasheet PDF (NCV7240 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal low-side relay driver.

Description

SSOP

Ground.

side drive output.

up device for operation.

side drive output.

up device for operation.

Features

8 Channels.
600 mA Low.
Side Drivers.
RDS(on) 1.5 W (Typ), 3 W (Max).
16.
bit SPI Control.
Frame Error Detection (8.
bit).
Daisy Chain Capable.
Parallel Input Pins for PWM operation.
Power Up Without Open Circuit Detection Active (for LED.

📥 Download Datasheet

NCV7240B octal low-side relay driver by ON Semiconductor - Datasheet Preview — Note: The manufacturer provides a single datasheet file (NCV7240_ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	NCV7240B
Manufacturer	onsemi
File Size	401.31 KB
Description	Octal Low-Side Relay Driver
Datasheet	NCV7240B Datasheet

📁 Similar Datasheet

NCV70628 - Micro-stepping Motor Driver (onsemi)

NCV7383 - Transceiver (ON Semiconducto)

NCV7410 - Automotive Ethernet Transceiver (onsemi)

NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)

NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)

NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)

NCV78514 - 1-Channel Automotive LED Driver (onsemi)

NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)

NCV2902 - Single Supply Quad Operational Amplifiers (ON)

NCV3025833 - Smart Power Stage (onsemi)

Full PDF Text Transcription

Click to expand full text

NCV7240, NCV7240A, NCV7240B Octal Low-Side Relay Driver The NCV7240 is an automotive eight channel low−side driver providing drive capability up to 600 mA per channel. Output control is via a SPI port and offers convenient reporting of faults for open load (or short to ground), over load, and over temperature conditions. Additionally, parallel control of the outputs is addressable (in pairs) via the INx pins. A dedicated limp−home mode pin (LHI) enables OUT1−OUT4 while disabling OUT5−OUT8. Each output driver is protected for over load current and includes an output clamp for inductive loads. The NCV7240 is available in a SSOP−24 fused lead package. Features • 8 Channels • 600 mA Low−Side Drivers ♦ RDS(on) 1.

Published: Oct 26, 2016 |