Datasheet4U Logo Datasheet4U.com

NCV21674 - Current-Shunt Monitors

This page provides the datasheet information for the NCV21674, a member of the NCV21673 Current-Shunt Monitors family.

Datasheet Summary

Description

OUT 1 GND 2 IN+ 3 5 VS 4 IN Single Channel TSOP 5 OUT 1 1 IN

Figure 2.

8 8 VS 7 OUT 2 6 IN 2 5 IN+ 2 PIN DESCRIPTION Pin Name Type IN+ Input IN Input OUT Output VS Supp

Features

  • Wide Common Mode Input Range:.
  • 0.1 V to 40 V.
  • Supply Voltage Range: 2.7 V to 5.5 V.
  • Low Offset Voltage.
  • Low Offset Drift.
  • Low Current Consumption: 300 mA max per channel.
  • NCV Prefix for Automotive Grade 1 and Other.

📥 Download Datasheet

Datasheet preview – NCV21674

Datasheet Details

Part number NCV21674
Manufacturer ON Semiconductor
File Size 975.19 KB
Description Current-Shunt Monitors
Datasheet download datasheet NCV21674 Datasheet
Additional preview pages of the NCV21674 datasheet.

📁 Similar Datasheet

  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
Current-Shunt Monitors, 40 V Common Mode, Unidirectional, Single, Dual NCS21673, NCV21673, NCS21674, NCV21674 The NCS21673 and NCS21674 are a series of current sense amplifiers offered in gains of 20, 50, 100 and 200 V/V. These parts can measure voltage across shunts at common mode voltages from −0.1 V to 40 V, independent of supply voltage. This helps measuring of fast transients and allows the same type of part to be used for high side and low side current sensing. These devices can operate from a single 2.7 V to 5.5 V power supply. With a −3 dB BW of up to 350 kHz and a Slew Rate of 2 V/us typical, the fast detection of current changes is ensured. These parts are available in TSOP−5 and Micro−8 packages.
Published: |