Datasheet4U Logo Datasheet4U.com

NCS5650 - 2 Amp PLC Line Driver

Description

Pin# Symbol Pin Function 1 Enable Enable/ Shutdown Input (Low = Enable) 2 Vcom Virtual Common at (VCC

VEE)/2; not to be used as a reference.

Negative ( ) Input of Op Amp A 5 Amp A Out Output o

Features

  • Rail.
  • to.
  • Rail Drop of Only $1 V with Iout = 1.5 A.
  • VCC: Single.
  • Sided (6 V to 12 V) or Dual.
  • Balanced $6.0 V.
  • Flexible 4th.
  • Order Filtering.
  • Current.
  • Limit Set with One Resistor.
  • Diagnostic Flags Level Shifted to V_mc to Simplify Interface with External MCU.
  • Thermal Warning Flag with Flexible Threshold Setting.
  • Thermal Error flag and Shutdown.
  • Overcurrent Flag.
  • Enable/Shut.

📥 Download Datasheet

Datasheet Details

Part number NCS5650
Manufacturer onsemi
File Size 160.73 KB
Description 2 Amp PLC Line Driver
Datasheet download datasheet NCS5650 Datasheet

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NCS5651 - 2 Amp PLC Line Driver
  • NCS5652 - Dual Power Operational Amplifier
  • NCS1002 - Constant Voltage/Constant Current Secondary-Side Controller
  • NCS1002A - Constant Voltage/Constant Current Secondary-Side Controller
  • NCS12802 - 12-Channel I2C Programmable Gamma Voltage Reference Generator
  • NCS199A1 - Current-Shunt Monitor
  • NCS199A1R - Current-Shunt Monitors
  • NCS199A2 - Current-Shunt Monitor

Full PDF Text Transcription

Click to expand full text
NCS5650 2 Amp PLC Line Driver The NCS5650 is a high efficiency, Class A/B, low distortion power line driver. Its design is optimized to accept a signal from a Power Line Carrier modem. The output stage is designed to drive up to 2 A peak into an isolation transformer or simple coil coupling to the mains. At output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail giving the user improved SNR. Power supply options are single−sided 6 V to 12 V and dual balanced $3.0 V to $6.0 V. The input stage contains an operational amplifier which can be configured as a unity gain follower buffer or used to provide the first stage of a 4−pole low pass filter.
Published: |