Datasheet4U Logo Datasheet4U.com

NCP81239A - USB Power Delivery 4-Switch Buck Boost Controller

This page provides the datasheet information for the NCP81239A, a member of the NCP81239 USB Power Delivery 4-Switch Buck Boost Controller family.

Datasheet Summary

Description

S1 gate drive.

node voltage VSW1.

channel MOSFET between ground and VDRV.

Features

  • Wide Input Voltage Range: from 4.5 V to 32 V.
  • Dynamically Programmed Frequency from 150 kHz to 1.2 MHz.
  • I2C Interface.
  • Real Time Power Good Indication.
  • Controlled Slew Rate Voltage Transitioning.
  • Feedback Pin with Internally Programmed Reference.
  • Support USBPD/QC2.0/QC3.0 Profile.
  • 2 Independent Current Sensing Inputs.
  • Over Temperature Protection.
  • Adaptive Non.
  • Overlap Gate Drivers.
  • Filter C.

📥 Download Datasheet

Datasheet preview – NCP81239A

Datasheet Details

Part number NCP81239A
Manufacturer ON Semiconductor
File Size 392.22 KB
Description USB Power Delivery 4-Switch Buck Boost Controller
Datasheet download datasheet NCP81239A Datasheet
Additional preview pages of the NCP81239A datasheet.

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NCP81239 - USB Power Delivery 4-Switch Buck Boost Controller
  • NCP81230H - Precise Low Voltage Synchronous Buck Controller
  • NCP81232 - Dual-Channel/Multi-Phase Controller
  • NCP81234 - Dual-Channel/Two-Phase Controller
  • NCP81228 - 8 + 2 Phase Output Controller
  • NCP81242 - Single-Phase Voltage Regulator
  • NCP81243 - Dual Output 3 & 2 Phase Controller
  • NCP81245 - Three-Rail Output Controller

Full PDF Text Transcription

Click to expand full text
NCP81239, NCP81239A USB Power Delivery 4-Switch Buck Boost Controller The NCP81239 USB Power Delivery (PD) Controller is a synchronous buck boost that is optimized for converting battery voltage or adaptor voltage into power supply rails required in notebook, tablet, and desktop systems, as well as many other consumer devices using USB PD standard and C−Type cables. The NCP81239 is fully compliant to the USB Power Delivery Specification when used in conjunction with a USB PD or C−Type Interface Controller. NCP81239 is designed for applications requiring dynamically controlled slew rate limited output voltage that require either voltage higher or lower than the input voltage.
Published: |