Datasheet4U Logo Datasheet4U.com

NCP5214A - Notebook DDR Power Controller

General Description

VDDQ regulator enable input.

High to enable.

VTT regulator enable input.

saving mode.

start capacitor connection to gr

Key Features

  • include soft.
  • start circuitries, undervoltage monitoring of supply voltage, VDDQ overcurrent protection, VDDQ overvoltage and undervoltage protections, and thermal shutdown. The IC is packaged in DFN22. Features.
  • Incorporates VDDQ, VTT Regulator, Buffered VREF.
  • Adjustable VDDQ Output.
  • VTT and VREF Track VDDQ/2.
  • Operates from Single 5.0 V Supply.
  • Supports VDDQ Conversion Rails from 4.5 V to 24 V.
  • Power.
  • saving Mode for High Effic.

📥 Download Datasheet

Datasheet Details

Part number NCP5214A
Manufacturer onsemi
File Size 417.38 KB
Description Notebook DDR Power Controller
Datasheet download datasheet NCP5214A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP5203 2-in-1 DDR Power Controller ON
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi

Other Datasheets by onsemi

Part Number Description
NCP5214 Notebook DDR Power Controller
NCP5210 PWM Dual Buck and Linear DDR Power Controller
NCP5211 Low Voltage Synchronous Buck Controller
NCP5211A Low Voltage Synchronous Buck Controller
NCP5212A Single Synchronous Step-Down Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP5214A 2−in−1 Notebook DDR Power Controller The NCP5214A 2−in−1 Notebook DDR Power Controller is specifically designed as a total power solution for notebook DDR memory system. This IC combines the efficiency of a PWM controller for the VDDQ supply with the simplicity of linear regulators for the VTT termination voltage and the buffered low noise reference. This IC contains a synchronous PWM buck controller for driving two external NFETs to form the DDR memory supply voltage (VDDQ). The DDR memory termination regulator output voltage (VTT) and the buffered VREF are internally set to track at the half of VDDQ. An internal power good voltage monitor tracks VDDQ output and notifies the user whether the VDDQ output is within target range.