Datasheet4U Logo Datasheet4U.com

NCP5010 - Boost Converter

General Description

System ground for the analog circuitry.

A high quality ground must be provided to avoid spikes and/ or uncontrolled operations.

Key Features

  • small size, minimal external components and high.
  • efficiency for use in portable.

📥 Download Datasheet

Datasheet Details

Part number NCP5010
Manufacturer onsemi
File Size 169.55 KB
Description Boost Converter
Datasheet download datasheet NCP5010 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCP5203 2-in-1 DDR Power Controller ON

Other Datasheets by onsemi

Part Number Description
NCP5005 Compact Backlight LED Boost Driver
NCP5006 Compact Backlight LED Boost Driver
NCP5008 Backlight LED Boost Driver
NCP5009 Backlight LED Boost Driver
NCP502 Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP5010 500 mW Boost Converter for White LEDs The NCP5010 is a fixed frequency PWM boost converter with integrated rectification optimized for constant current applications such as driving white LEDs. This device features small size, minimal external components and high−efficiency for use in portable applications and is capable of providing up to 500 mW output power to 2−5 series connected white LEDs. A single resistor sets the LED current and the CTRL pin can be pulse width modulated (PWM) to reduce the LED Current. The device includes True−Cutoff circuitry to disconnect the load from the battery when the device is put into standby mode. To protect the device, an output overvoltage protection, and short circuit protection have been incorporated.