Datasheet4U Logo Datasheet4U.com

NCP362 - USB Positive Overvoltage and Overcurrent Protection

Description

Pin No.

1 EN INPUT Enable Pin.

The device enters in shutdown mode when this pin is tied to a high level.

Features

  • Overvoltage Protection up to 20 V.
  • Undervoltage and Overvoltage Lockout (UVLO/OVLO).
  • Overcurrent Protection.
  • Transient Voltage Suppressor for VBUS Pin.
  • Ultra Low Capacitance ESD for Data Lines.
  • Alert FLAG Output and EN Enable Pin.
  • Thermal Shutdown.
  • Compliance to IEC61000.
  • 4.
  • 2 (Level 4).
  • Compliance Machine Model and Human Body Model.
  • 10 Lead UDFN 2x2.5 mm Package.
  • This is a Pb.

📥 Download Datasheet

Datasheet Details

Part number NCP362
Manufacturer onsemi
File Size 729.82 KB
Description USB Positive Overvoltage and Overcurrent Protection
Datasheet download datasheet NCP362 Datasheet

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NCP360 - USB Positive Overvoltage Protection Controller
  • NCP361 - USB Positive Overvoltage Protection Controller
  • NCP300 - Voltage Detector
  • NCP301 - Voltage Detector
  • NCP3011 - Synchronous PWM Controller
  • NCP3012 - Synchronous PWM Controller
  • NCP302 - Voltage Detector
  • NCP302035 - Integrated Driver/MOSFET

Full PDF Text Transcription

Click to expand full text
NCP362 USB Positive Overvoltage and Overcurrent Protection with TVS for VBUS and Low Capacitance ESD Diodes for Data The NCP362 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive overvoltage protected up to +20 V, overcurrent protected up to 750 mA, and receives protection from ESD diodes for the high speed USB data and VBUS lines. Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP362 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold OVLO.
Published: |