NCP105 - LDO Regulator

Datasheet Summary

Description

Pin No.

Regulated output voltage pin.

needed from this pin to ground to assure stability.

Features

Operating Input Voltage Range: 1.7 V to 5.5 V.
Available in Fixed Voltage Options: 0.8 V to 3.6 V Contact Factory for Other Voltage Options.
Very Low Quiescent Current of Typ. 50 mA.
Soft Start Feature with Two VOUT Slew Rate Speed.
Standby Current Consumption: Typ. 0.1 mA.
Low Dropout: 125 mV Typical at 150 mA @ 2.8 V.
±1% Accuracy at Room Temperature.
High Power Supply Ripple Rejection: 70 dB at 1 kHz.
Thermal Sh.

ON Semiconductor

📥 Download Datasheet

Datasheet Details

Part number	NCP105
Manufacturer	ON Semiconductor
File Size	1.46 MB
Description	LDO Regulator
Datasheet	NCP105 Datasheet
Additional preview pages of the NCP105 datasheet.

📁 Similar Datasheet

NCP1030 - Integrated DC-DC Converter (ON)
NCP1031 - Integrated DC-DC Converter (ON)
NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator (ON)
NCP1212 - Current Mode PWM Controller (ON)
NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
NCP1216 - PWM Current-Mode Controller (ON)
NCP1225 - Low Standby Power SMPS Controller (ON)
NCP1232 - Microprocessor Monitor (ON)
NCP1280 - Active Clamp Voltage Mode PWM Controller (ON)
NCP1410 - 250 mA Sync-Rect PFM Step-Up DC-DC Converter (ON)

Other Datasheets by ON Semiconductor

NCP1050 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP1051 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP1052 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP1053 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP1054 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP1055 - Monolithic High Voltage Gated Oscillator Power Switching Regulator
NCP100 - Sub 1.0V Precision Adjustable Shunt Regulator
NCP1000 - Integrated Off-Line Switching Regulator

Full PDF Text Transcription

Click to expand full text

LDO Regulator - High PSRR 150 mA NCP105 The NCP105 is 150 mA LDO that provides the engineer with a very stable, accurate voltage with low noise suitable for space constrained, noise sensitive applications. In order to optimize performance for battery operated portable applications, the NCP105 employs the dynamic quiescent current adjustment for very low IQ consumption at no−load. Features • Operating Input Voltage Range: 1.7 V to 5.5 V • Available in Fixed Voltage Options: 0.8 V to 3.6 V Contact Factory for Other Voltage Options • Very Low Quiescent Current of Typ. 50 mA • Soft Start Feature with Two VOUT Slew Rate Speed • Standby Current Consumption: Typ. 0.1 mA • Low Dropout: 125 mV Typical at 150 mA @ 2.

Published: Oct 5, 2022 |