NCL30161 - Constant-Current Buck Regulator

Datasheet Summary

Description

Pin Pin Name Description 1 CS Current Sense feedback pin 2, 4, 7 3 5 NC GND VCC No Connect Ground Pin Output of Internal 5 V linear regulator 6 ROT Initial Off Time Setting Resistor 8 DIM/EN PWM Dimming Control and ENABLE 9 VIN Input Voltage Pin 10 GATE 11 FLAG Driver

Features

include resistor.
programmed constant LED current, shorted LED protection, under.
voltage and thermal shutdown. The NCL30161 is available in a DFN10 3 mm x 3 mm package. Features.
VIN Range 6.3 V to 40 V.
Short LED Shutdown Protection: (NCL30161 Latching).
No Control Loop Compensation Required.
Adjustable LED Current.
Single Pin Brightness and Enable/Disable Control Using PWM.
Supports All.
Ceramic Output Capacitors and Capacitor.
less Ou.

ON Semiconductor

📥 Download Datasheet

Datasheet Details

Part number	NCL30161
Manufacturer	ON Semiconductor
File Size	209.59 KB
Description	Constant-Current Buck Regulator
Datasheet	NCL30161 Datasheet
Additional preview pages of the NCL30161 datasheet.

📁 Similar Datasheet

NCL020 - Crystal Clock Oscillator (SaRonix)
NCL030 - Crystal Clock Oscillator (SaRonix)
NCLD3B1256M32 - 8Gb LPDDR3 SDRAM (FORESEE)
NCLD3B2512M32 - 16Gb LPDDR3 SDRAM (FORESEE)

Other Datasheets by ON Semiconductor

NCL30160 - 1.0A Constant-Current Buck Regulator
NCL30167 - LED Boost Switching Regulator
NCL30100 - Fixed Off Time Switched Mode LED Driver Controller
NCL30105 - Constant Off Time PWM Current-Mode Controller
NCL30125 - Current-Mode Controller
NCL30159AA - LLC Converter Controller
NCL30185 - Quasi-Resonant Primary Side Current-Mode Controller
NCL30188 - Power Factor Corrected Quasi-Resonant Primary Side Current-Mode Controller

Full PDF Text Transcription

Click to expand full text

DATA SHEET www.onsemi.com Constant-Current Buck Regulator for Driving High Power LEDs DFN10 CASE 485C NCL30161 The NCL30161 is a hysteretic step−down, constant−current driver for high power LEDs. Ideal for industrial and general lighting applications utilizing minimal external components. The NCL30161 operates with an input voltage range from 6.3 V to 40 V. The hysteretic control gives good power supply rejection and fast response during load transients and PWM dimming to LED arrays of varying number and type. A dedicated PWM input (DIM/EN) enables a wide range of pulsed dimming, and a high switching frequency allows the use of smaller external components minimizing space and cost.

Published: Jan 21, 2016 |