Datasheet4U Logo Datasheet4U.com

LC898214XC - AF Controller

Description

I O B INPUT OUTPUT BIDIRECTION B B O O O P P O I2C Clock pin I2C Data pin Hall amp output Actuator output pin Actuator output pin Power supply GND Test pin P TYPE Power supply, GND NC NOT CONNECT I2C interface I2CCK I2CDT Hall interface HALL Driver interface OUT1 OUT2 Power

Features

  •  Built-in equalizer circuit using digital operation - AF control equalize circuit - Any coefficient can be specified by I2C I/F  I2C Interface  Built-in A/D converter - Maximum 10-bit - Input 2 channel  Built-in D/A converter - 8-bit - Output 2-channel (Hall offset, Constant current Bias)  Built-in Hall Sensor - Si Hall sensor  Built-in EEPROM - 128 byte (8 byte/page)  Built-in VGA - Hall Amp  Built-in OSC - 48MHz  Built-in Constant Current Driver  Package - WL-CSP 8-pin - Lead-free, h.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC898212XA AF Control LSI Sanyo
LC898093 Write CD-R/RW Encoder/Decoder IC Sanyo Semicon Device
LC898094 LC898094 Sanyo
LC898128DP OIS & Open-AF Control LSI onsemi
LC8900KQ Digital Audio Interface Receiver Sanyo

Other Datasheets by onsemi

Part Number Description
LC898214XC-MH AF Controller
LC898214XD AF Controller
LC898212XA AF Control LSI
LC898212XC AF Controller
LC898212XD AF Controller

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA2328A LC898214XC CMOS LSI AF Controller Overview This LSI is AF control LSI. It consists of 1 system of feedback circuit for AF control. http://onsemi.com Features  Built-in equalizer circuit using digital operation - AF control equalize circuit - Any coefficient can be specified by I2C I/F  I2C Interface  Built-in A/D converter - Maximum 10-bit - Input 2 channel  Built-in D/A converter - 8-bit - Output 2-channel (Hall offset, Constant current Bias)  Built-in Hall Sensor - Si Hall sensor  Built-in EEPROM - 128 byte (8 byte/page)  Built-in VGA - Hall Amp  Built-in OSC - 48MHz  Built-in Constant Current Driver  Package - WL-CSP 8-pin - Lead-free, halogen-free  Supply voltage - VDD (2.6V to 3.6V) WLCSP8, 1.15x2.37, 0.
Published: |