Datasheet4U Logo Datasheet4U.com

LC717A30UJ - Capacitance-Digital-Converter LSI

Description

Power supply (+2.6 V to +5.5 V) (Note 1) Ground (Notes 1, 2) Connect to Ground Sensor inputs.

Cin0 to Cin7 are connected to the inverting input of the 1st amplifier through the multiplexer.

All unused input pins must remain open.

Features

  • Differential Capacitive Detection Using Mutual Capacitance.
  • Operates with Small to Large Capacitance Sensor Input Pads.
  • Capacitance Detection Down to Femto-Farad Level.
  • Measurement Time 16 ms for 8 Sensors.
  • Minimal External Components.
  • Selectable Interface: I2C or SPI.
  • Current Consumption: 0.8 mA (VDD = 5.5 V).
  • Supply Voltage: 2.6 V to 5.5 V.
  • AEC.
  • Q100 Qualified and PPAP Capable Typical.

📥 Download Datasheet

Datasheet Details

Part number LC717A30UJ
Manufacturer onsemi
File Size 181.19 KB
Description Capacitance-Digital-Converter LSI
Datasheet download datasheet LC717A30UJ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC717A00AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A00AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A10AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A10AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC7120 CMOS LSI 27MHz CB TRANSCEIVER PLL FREQUENCY SYNTHESIZER Sanyo Semicon Device

Other Datasheets by onsemi

Part Number Description
LC717A30UR Capacitance-Digital-Converter LSI
LC717A00AJ Capacitance-Digital-Converter LSI
LC717A00AR Capacitance-Digital-Converter LSI
LC717A00ARGEVK Capacitance-Digital-Converter IC
LC717A10AJ Capacitance-Digital-Converter LSI

Full PDF Text Transcription

Click to expand full text
LC717A30UJ Capacitance‐Digital‐Converter LSI for Electrostatic Capacitive Touch Sensors The LC717A30UJ is a high performance, low cost, and highly usable capacitance converter for electrostatic capacitive touch and proximity sensors. 8 capacitance-sensing input channels ideal for use in any end products that needs an array of switches. The LC717A30UJ facilitates a short system development time through its automatic calibration function and minimal external components. The detection result (ON/OFF) for each sensor is read out by the serial interface (I2C or SPI). www.onsemi.
Published: |