Datasheet4U Logo Datasheet4U.com

FXL6408 - Fully Configurable 8-Bit I2C-Controlled GPIO Expander

General Description

The FXL6408 is an 8 bit I2C

controlled GPIO expander.

configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the INT pin.

Key Features

  • an active LOW RESET input as well as Power.
  • On Reset (POR) circuit and I2C software reset options. Features.
  • 4X Expansion of Connected Processor I/O Ports.
  • Fully Integrated I2C Slave.
  • 8 Independently Configurable I/O Ports.
  • Low.
  • Power Quiescent Current: 1.5 mA.
  • Voltage Translation Capable from 1.65 V I2C Port Up to 4.0 V GPIO Pins.
  • Selectable Device Address.
  • 6 mA Output Drive.
  • Interrupt Pin to Alert Processor o.

📥 Download Datasheet

Datasheet Details

Part number FXL6408
Manufacturer onsemi
File Size 302.03 KB
Description Fully Configurable 8-Bit I2C-Controlled GPIO Expander
Datasheet download datasheet FXL6408 Datasheet

Other Datasheets by onsemi

Part Number Description
FXLA0104 Low-Voltage Dual-Supply 4-Bit Voltage Translator
FXLA102 Low-Voltage Dual-Supply 2-Bit Voltage Translator
FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator
FXLA108 Low-Voltage Dual-Supply 8-Bit Voltage Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Fully Configurable 8-Bit I2C-Controlled GPIO Expander FXL6408  Description The FXL6408 is an 8−bit I2C−controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull−up or pull−down resistors to pre−bias the inputs in open−drain or non−driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6 mA output drive according to the I2C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65 V and up to 4.0 V.