Datasheet4U Logo Datasheet4U.com

FUSB302T - Programmable USB Type-C Controller

General Description

The FUSB302T targets system designers looking to implement USB Type

C wall charger or Travel adaptor.

In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability.

Key Features

  • Dual-role Functionality with Autonomous DRP Toggle.
  • Ability to Connect as Either a Host or a Device Based on What Has Been Attached.
  • Software Configurable Either as a Dedicated Host, Dedicated Device, or Dual Role.
  • Dedicated Devices can Operate both on a Type-C Receptacle or a Type-C Plug with a Fixed CC and VCONN Channel.
  • Full Type-C 1.2 Support. Integrates the Following Functionality of the CC Pin:.
  • Attach/Detach Detection as Host.

📥 Download Datasheet

Datasheet Details

Part number FUSB302T
Manufacturer onsemi
File Size 314.68 KB
Description Programmable USB Type-C Controller
Datasheet download datasheet FUSB302T Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FUSB302 Programmable USB Type-C Controller Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FUSB302 Programmable USB Type-C Controller
FUSB302B Programmable USB Type-C Controller
FUSB301 Autonomous USB Type-C Controller
FUSB301A Autonomous USB Type-C Controller
FUSB303B Autonomous USB Type-C Port Controller
FUSB307B USB Type-C Controller
FUSB3307 USB Power Delivery 3.0 Adaptive Source Charging Controller
FUSB3317 Automotive USB Power Delivery Source Controller
FUSB340 USB 3.1 SuperSpeed 10Gbps Switch
FUSB15200 Dual Port USB Type-C & PD Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Programmable USB Type‐C Controller w/PD FUSB302T Description The FUSB302T targets system designers looking to implement USB Type−C wall charger or Travel adaptor. In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability. The FUSB302T enables the USB Type-C detection including attach/detach, and orientation. The FUSB302T integrates the physical layer of the USB BMC power delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification. WQFN14 CASE 510BR ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet.