Datasheet4U Logo Datasheet4U.com

CS5208-1 - 8.0A LDO 3-Pin Adjustable Linear Regulator

Description

Package Pin Number TO

This pin is connected to the low side of the internally trimmed 1.5% bandgap reference voltage and carries a bias current of about 70 μA.

Features

  • 1.25 V to 4.5 V VOUT at 8.0 A.
  • Dropout Voltage < 1.0 V @ 8.0 A.
  • 1.5% Trimmed Reference.
  • Fast Transient Response.
  • Thermal Shutdown.
  • Current Limit.
  • Short Circuit Protection 5.0 V VIN VOUT CS5208.
  • 1 Adj 100 μF 0.1 μF 3.3 V @ 8.0 A 124 Load 200 300 μF Figure 1.

📥 Download Datasheet

Datasheet Details

Part number CS5208-1
Manufacturer onsemi
File Size 211.57 KB
Description 8.0A LDO 3-Pin Adjustable Linear Regulator
Datasheet download datasheet CS5208-1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS5208-1 8A LDO 3-Pin Adjustable Linear Regulator Cherry Semiconductor Corporation
CS5201-1 1A Adjustable Linear Regulator Cherry Semiconductor Corporation
CS5201-3 1A/ 3.3V Fixed Linear Regulator Cherry Semiconductor Corporation
CS52015-1 1.5A Adjustable Linear Regulator Cherry Semiconductor Corporation
CS52015-3 1.5A/ 3.3V Fixed Linear Regulator Cherry Semiconductor Corporation

Other Datasheets by onsemi

Part Number Description
CS5201-1 1.0 A Adjustable Linear Regulator
CS5201-3 Linear Regulator
CS52015-1 Linear Regulator
CS52015-3 Linear Regulator
CS5203-1 3.0 A Adjustable Linear Regulator

Full PDF Text Transcription

Click to expand full text
CS5208−1 8.0 A LDO 3−Pin Adjustable Linear Regulator The CS5208−1 linear regulator provides 8.0 A at adjustable voltages from 1.25 V to 4.5 V. This adjustable device requires two external resistors to set the output voltage and provide the minimum load current for proper regulation. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V at 8.0 A. The regulator is protected against overload conditions with overcurrent and thermal shutdown protection circuitry. The regulator is available in a TO−220 package. Features • 1.25 V to 4.
Published: |