Datasheet4U Logo Datasheet4U.com

CS5207-1 - 7.0A Adjustable Linear Regulator

Description

Package Pin Number TO

Function Adjust pin (low side of the internal reference).

Regulated output voltage (case).

Input voltage.

1 TYPICAL PERFORMANCE CHARACTERISTICS

Features

  • Output Current to 7.0 A.
  • Output Trimmed to ±1.5%.
  • Dropout Voltage 1.4 V @ 7.0 A.
  • Fast Transient Response.
  • Fault Protection Circuitry.
  • Thermal Shutdown.
  • Overcurrent Protection.
  • Safe Area Protection VOUT VIN Thermal Shutdown Bandgap Output Current Limit.
  • + Error Amplifier Adj http://onsemi. com TO.
  • 220 THREE LEAD T SUFFIX CASE 221A 12 3 PIN.

📥 Download Datasheet

Datasheet Details

Part number CS5207-1
Manufacturer onsemi
File Size 193.95 KB
Description 7.0A Adjustable Linear Regulator
Datasheet download datasheet CS5207-1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS5207-1 7A Adjustable Linear Regulator Cherry Semiconductor Corporation
CS5207-2 7A/ 1.5V Fixed Linear Regulator Cherry Semiconductor Corporation
CS5207-3 7A/ 3.3V Fixed Linear Regulator Cherry Semiconductor Corporation
CS5207A-1 7A LDO 3-Pin Adjustable Linear Regulator Cherry Semiconductor Corporation
CS5201-1 1A Adjustable Linear Regulator Cherry Semiconductor Corporation

Other Datasheets by onsemi

Part Number Description
CS5207-2 Linear Regulator
CS5207-3 3.3V Fixed Linear Regulator
CS5207A-1 7.0A LDO 3-Pin Adjustable Linear Regulator
CS5201-1 1.0 A Adjustable Linear Regulator
CS5201-3 Linear Regulator

Full PDF Text Transcription

Click to expand full text
CS5207−1 7.0 A Adjustable Linear Regulator The CS5207−1 linear regulator provides 7.0 A adjustable voltages with an accuracy of ±1.5 %. Two external resistors are used to set the output voltage within a 1.25 V to 13 V range. The regulator is intended for use as post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current. The maximum quiescent current is only 10 mA at full load. The regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.
Published: |