Datasheet4U Logo Datasheet4U.com

CS5204-2 - 1.5 V Fixed Linear Regulator

Description

Package Pin Number TO 220 3 D2PAK

Ground connection.

Regulated output voltage (case).

Input voltage.

2 1.20 1.15 1.10 1.05 1.0

Features

  • Output Current to 4.0 A.
  • Output Voltage Trimmed to ±2.0%.
  • Dropout Voltage (typical) 1.10 V @ 4.0 A.
  • Fast Transient Response.
  • Fault Protection Circuitry.
  • Thermal Shutdown.
  • Overcurrent Protection.
  • Safe Area Protection VOUT VIN Thermal Shutdown Bandgap Output Current Limit.
  • + Error Amplifier Figure 1. Block Diagram GND http://onsemi. com TO.
  • 220.
  • 3 T SUFFIX CASE 221A Tab = VOUT Pin 1. GND 12 3.

📥 Download Datasheet

Datasheet Details

Part number CS5204-2
Manufacturer onsemi
File Size 193.48 KB
Description 1.5 V Fixed Linear Regulator
Datasheet download datasheet CS5204-2 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS5201-1 1A Adjustable Linear Regulator Cherry Semiconductor Corporation
CS5201-3 1A/ 3.3V Fixed Linear Regulator Cherry Semiconductor Corporation
CS52015-1 1.5A Adjustable Linear Regulator Cherry Semiconductor Corporation
CS52015-3 1.5A/ 3.3V Fixed Linear Regulator Cherry Semiconductor Corporation
CS5202 CS5202 CMOS ETC

Other Datasheets by onsemi

Part Number Description
CS5204-1 Linear Regulators
CS5204-3 Linear Regulators
CS5204-5 Linear Regulators
CS5201-1 1.0 A Adjustable Linear Regulator
CS5201-3 Linear Regulator

Full PDF Text Transcription

Click to expand full text
CS5204−2 4.0 A, 1.5 V Fixed Linear Regulator The CS5204−2 linear regulator provides 4.0 A @ 1.5 V with an accuracy of ±2.0%. The fast loop response and low dropout voltage make this regulator ideal for GTL bus termination where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load. The regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown. The regulator is available in TO−220−3 and surface mount D2PAK−3 packages. Features • Output Current to 4.0 A • Output Voltage Trimmed to ±2.0% • Dropout Voltage (typical) 1.10 V @ 4.
Published: |