Datasheet4U Logo Datasheet4U.com

R1191H036B-T1-FE - 300mALDO REGULATOR

Download the R1191H036B-T1-FE datasheet PDF. This datasheet also covers the R1191N030B-TR-FE variant, as both devices belong to the same 300maldo regulator family and are provided as variant models within a single manufacturer datasheet.

Description

∗1) Tab is GND level.

Features

  • Supply Current Typ. 50µA (Fast Mode), Typ. 6.0µA (Low Power Mode).
  • Standby Mode Typ. 0.3µA.
  • Reverse Current Max. 0.1µA.
  • Output Current Min. 300mA.
  • Input Voltage Range 3.5V to 16.0V.
  • Output Voltage Range 2.0V to 15.0V (0.1V steps) (For other voltages, please refer to MARK.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (R1191N030B-TR-FE-Nisshinbo.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
R1100 16 Bit RISC Micro Processor RDC Semiconductor
R1100D ULTRA SMALL PACKAGE VOLTAGE REGULATOR RICOH
R1110N301A LOW NOISE 150mA L.D.O REGULATOR RICOH
R1110N301B LOW NOISE 150mA L.D.O REGULATOR RICOH
R1110N401A LOW NOISE 150mA L.D.O REGULATOR RICOH

Other Datasheets by Nisshinbo

Part Number Description
R1191H036D-T1-FE 300mALDO REGULATOR
R1191H030B-T1-FE 300mALDO REGULATOR
R1191H030D-T1-FE 300mALDO REGULATOR
R1191H033B-T1-FE 300mALDO REGULATOR
R1191H033D-T1-FE 300mALDO REGULATOR

Full PDF Text Transcription

Click to expand full text
R1191x SERIES 300mA LDO REGULATOR with the Reverse Current Protection NO.EA-229-220315 OUTLINE R1191x Series are a low supply current voltage regulator with high output voltage accuracy. The maximum operating voltage is 16V. These ICs can switch to the fast mode and the low power mode by the low power / fast mode changer pin (ECO pin) without changing the output voltage value. Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit, a thermal shutdown circuit and a chip enable circuit. Moreover, the R1191x Series has the reverse current protection function, which protects the reverse current flow into VDD pin when the output pin voltage becomes higher than the VDD pin voltage.
Published: |