Datasheet4U Logo Datasheet4U.com

NJU72013 - 2Vrms Ground Referenced Stereo Line Amplifier

Description

The NJU72013 is an audio line Amplifier .

(5.6V peak-to-peak) signal at 3.3V operating voltage.

Ground-referenced outputs eliminate output coupling capacitor.

Features

  • O Operating Voltage +2.7 to +3.6V O Operating Current IDD=4.5mA typ. at V+=3.3V, RL=47kΩ, No Signal O Output Coupling Capacitor-less O Pop Noise Suppression Circuit O 2nd order LPF O C-MOS Technology O Package Outline MSOP10 (TVSP10) Q BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

  • NJU72060 - 500mW MONAURAL SPEAKER AMPLIFIER (JRC)
  • NJU7211 - C-MOS 3-TERMINAL NEGATIVE VOLTAGE REGULATOR (JRC)
  • NJU7221 - HIGH PRECISION C-MOS 3-TERMINAL VOLTAGE REGULATOR (JRC)
  • NJU7222 - C-MOS 3-TERMINAL VOLTAGE REGULATOR (JRC)
  • NJU7223 - 500mA Low Dropout Voltage Regulator (JRC)
  • NJU7231 - High Precision C-MOS 3-Terminal Voltage Regulator (JRC)
  • NJU7241 - High-Precision LDO 60mA C-MOS Voltage Regulator (JRC)
  • NJU7250 - Low Dropout Voltage Regulator (JRC)
  • NJU7254 - 2ch LOW DROPOUT VOLTAGE REGULATOR (JRC)
  • NJU7261 - C-MOS STEP-UP SWITCHING REGULATOR (JRC)
Other Datasheets by New Japan Radio
  • NJU7201 - C-MOS 3-TERMINAL POSITIVE VOLTAGE REGULATOR
  • NJU72010 - 2Vrms Ground Referenced Stereo Line Amplifier
  • NJU72011 - 2Vrms Ground Referenced Stereo Line Amplifier
  • NJU72014 - 2Vrms Ground Referenced Stereo Line Amplifier
  • NJU72015 - 2Vrms Ground Referenced Stereo Line Amplifier
  • NJU7200 - SUPER LOW OPERATING CURRENT C-MOS 3-TERMINAL VOLTAGE REGULATOR
  • NJU7202 - HIGH OUTPUT CURRENT C-MOS 3-TERMINAL VOLTAGE REGULATOR
  • NJU72040 - Ground Referenced Stereo Headphone Amplifier

Full PDF Text Transcription

Click to expand full text
NJU72013 2Vrms Ground Referenced Stereo Line Amplifier with LPF Q GENERAL DESCRIPTION The NJU72013 is an audio line Amplifier . It can swing 2Vrms (5.6V peak-to-peak) signal at 3.3V operating voltage. Ground-referenced outputs eliminate output coupling capacitor. The pop noise suppression circuit removes a pop noise at the power-on and power-off. It is suitable for audio line interface of audio equipment which does not have over 9V regulator. Q PACKAGE OUTLINE NJU72013RB2 Q APPLICATIONS O Audio applications requiring 2Vrms outputs Q FEATURES O Operating Voltage +2.7 to +3.6V O Operating Current IDD=4.5mA typ.at V+=3.
Published: |