Datasheet4U Logo Datasheet4U.com

LM6154 - Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers

General Description

Using patented circuit topologies, the LM6152/54 provides new levels of speed vs.

power performance in applications where low voltage supplies or power limitations previously made compromise necessary.

Key Features

  • At VS = 5V, Typ unless noted n Greater than Rail-to-Rail Input CMVR.
  • 0.25V to 5.25V n Rail-to-Rail Output Swing 0.01V to 4.99V n Wide Gain-Bandwidth: 75 MHz @ 100 kHz n Slew Rate: Small signal 5V/µs Large signal 45V/µs n Low supply current 1.4mA/amplifier n Wide supply range 2.7V to 24V n Fast settling time of 1.1µs for 2V step (to 0.01%) n PSRR 91 dB n CMRR 84 dB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM6154 GBW Rail-to-Rail I/O Operational Amplifier Texas Instruments
LM6154BCM GBW Rail-to-Rail I/O Operational Amplifier Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM615 LM615 Quad Comparator and Adjustable Reference
LM6152 Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
LM61 2.7V/ SOT-23 or TO-92 Temperature Sensor
LM6104 Quad Gray Scale Current Feedback Amplifier
LM611 Operational Amplifier and Adjustable Reference
LM6118 Fast Settling Dual Operational Amplifiers
LM612 Dual-Channel Comparator and Reference
LM6121 High Speed Buffer
LM6125 High Speed Buffer
LM613 Dual Operational Amplifiers/ Dual Comparators/ and Adjustable Reference

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM6152/LM6154Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers May 1999 LM6152/LM6154 Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers General Description Using patented circuit topologies, the LM6152/54 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 1.4 mA/amplifier supply current, the 75 MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude.