Datasheet4U Logo Datasheet4U.com

LM614 - Quad Operational Amplifier and Adjustable Reference

General Description

The LM614 consists of four op-amps and a programmable voltage reference in a 16-pin package.

The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current.

Key Features

  • Op Amp n Low operating current: 300 µA n Wide supply voltage range: 4V to 36V n Wide common-mode range: V.
  • to (V+.
  • 1.8V) n Wide differential input voltage: ± 36V n Available in plastic package rated for Military Temperature Range Operation Reference n Adjustable output voltage: 1.2V to 6.3V n Tight initial tolerance available: ± 0.6% n Wide operating current range: 17 µA to 20 mA n Tolerant of load capacitance.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM6142 Rail-to-Rail Input-Output Operational Amplifiers Texas Instruments
LM6144 Rail-to-Rail Input-Output Operational Amplifiers Texas Instruments
LM61440 Low EMI Synchronous Step-Down Converter Texas Instruments
LM61440-Q1 Automotive Low EMI Synchronous Step-Down Converter Texas Instruments
LM61460-Q1 Automotive Low EMI Synchronous Step-Down Converter Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM6142 High Speed/Low Power 17 MHz Rail-to-Rail Input-Output Operational Amplifiers
LM6144 High Speed/Low Power 17 MHz Rail-to-Rail Input-Output Operational Amplifiers
LM61 2.7V/ SOT-23 or TO-92 Temperature Sensor
LM6104 Quad Gray Scale Current Feedback Amplifier
LM611 Operational Amplifier and Adjustable Reference
LM6118 Fast Settling Dual Operational Amplifiers
LM612 Dual-Channel Comparator and Reference
LM6121 High Speed Buffer
LM6125 High Speed Buffer
LM613 Dual Operational Amplifiers/ Dual Comparators/ and Adjustable Reference

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM614 Quad Operational Amplifier and Adjustable Reference May 1998 LM614 Quad Operational Amplifier and Adjustable Reference General Description The LM614 consists of four op-amps and a programmable voltage reference in a 16-pin package. The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current. This device was specifically designed to lower cost and board space requirements in transducer, test, measurement and data acquisition systems. Combining a stable voltage reference with four wide output swing op-amps makes the LM614 ideal for single supply transducers, signal conditioning and bridge driving where large common-mode-signals are common.