Datasheet4U Logo Datasheet4U.com

LM565 - Phase Locked Loop

General Description

The LM565 and LM565C are general purpose phase locked loops containing a stable, highly linear voltage controlled oscillator for low distortion FM demodulation, and a double balanced phase detector with good carrier suppression.

Key Features

  • n 200 ppm/˚C frequency stability of the VCO n Power supply range of ± 5 to ± 12 volts with 100 ppm/% typical Connection Diagrams Metal Can Package Dual-in-Line Package DS007853-2 DS007853-3 Order Number LM565H See NS Package Number H10C Order Number LM565CN See NS Package Number N14A © 1999 National Semiconductor Corporation DS007853 www. national. com Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Of.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM56 Dual Output Low Power Thermostat Texas Instruments
LM561C Middle Power LED Samsung
LM5623-11 THREE DIGIT DISPLAY Ledtech
LM5623-11EWRN THREE DIGIT DISPLAY Ledtech
LM5642 Dual Synchronous Buck Converter Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM56 Dual Output Low Power Thermostat
LM5642 High Voltage/ Dual Synchronous Buck Converter
LM566C LM566C Voltage Controlled Oscillator
LM567 Tone Decoder
LM567C Tone Decoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM565/LM565C Phase Locked Loop May 1999 LM565/LM565C Phase Locked Loop General Description The LM565 and LM565C are general purpose phase locked loops containing a stable, highly linear voltage controlled oscillator for low distortion FM demodulation, and a double balanced phase detector with good carrier suppression. The VCO frequency is set with an external resistor and capacitor, and a tuning range of 10:1 can be obtained with the same capacitor. The characteristics of the closed loop system — bandwidth, response speed, capture and pull in range — may be adjusted over a wide range with an external resistor and capacitor. The loop may be broken between the VCO and the phase detector for insertion of a digital frequency divider to obtain frequency multiplication.