LM4926 - Ground-Referenced and Ultra Low Noise - Fixed Gain - 80mW Stereo Headphone Amplifier

Product Overview

National Semiconductor

Datasheet Details

Part number	LM4926
Manufacturer	National Semiconductor
File Size	1.59 MB
Description	Ground-Referenced and Ultra Low Noise - Fixed Gain - 80mW Stereo Headphone Amplifier
Datasheet	LM4926 Datasheet
Additional preview pages of the LM4926 datasheet.

Product details

Description

The LM4926 is a ground referenced, fixed-gain audio power amplifier capable of delivering 80mW of continuous average power into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply.

Features

a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads. The LM4926 features an Automatic Standby Mode circuitry (patent pending). In the absence of an input signal, after approximately 12 seconds, the LM4926 goes into low current standby mode. The LM4926 recovers into full power operating mode immediately after a s.

📁 Similar Datasheet

LM49200 - Stereo Class AB Audio Subsystem (Texas Instruments)
LM49200TLEVAL - Stereo Class AB Audio Subsystem (Texas Instruments)
LM4924 - Stereo Headphone Audio Amplifier (Texas Instruments)
LM49251 - Stereo Audio Subsystem (Texas Instruments)
LM4927 - 2.5 Watt Fully Differential Audio Power Amplifier (Texas Instruments)
LM49270 - Filterless 2.2W Stereo Class D Audio Subsystem (Texas Instruments)
LM4928 - 1.2 Watt Stereo Fully Differential Audio Amplifier (Texas Instruments)
LM4929 - Stereo 40mW Low Noise Headphone Amplifier (Texas Instruments)

Other Datasheets by National Semiconductor

LM4920 - Stereo Headphone Amplifier
LM4921 - Low Voltage I2S 16-Bit Stereo DAC
LM4922 - 80mW Stereo Headphone Amplifier
LM4923 - 1.1 Watt Fully Differential Audio Power Amplifier
LM4925 - 2 Cell/ Single Ended Output 40mW Stereo Headphone Audio Amplifier
LM49250 - Enhanced Emissions Suppression Stereo Class D Audio Sub-System

Published: Apr 25, 2010 |