Datasheet4U Logo Datasheet4U.com

LM4873 - Dual 2.1W Audio Amplifier

General Description

The LM4873 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W to a 4Ω load (Note 1) or 2.4W to a 3Ω load (Note 2)with less than 1.0% THD+N.

Key Features

  • an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on. Note 1: An LM4873MTE-1 which has been properly mounted to the circuit board will deliver 2.1W into 4Ω. The other package options for the LM4873 will deliver 1.1W into 8Ω. See the.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM4873 Dual 2.1W Audio Amplifier Texas Instruments
LM4871 3W Audio Power Amplifier Texas Instruments
LM4871M 3W Audio Power Amplifier Texas Instruments
LM4875 750mW Audio Power Amplifier Texas Instruments
LM4876 1.1W Audio Power Amplifier Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM4870 1.1W Audio Power Amplifier
LM4871 1.1W Audio Power Amplifier
LM4872 1Watt Audio Power Amplifier
LM4874 BTL Output Stereo Audio Amplifier
LM4875 750mW Audio Power Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM4873 Dual 2.1W Audio Amplifier Plus Stereo Headphone Function April 2000 LM4873 Dual 2.1W Audio Amplifier Plus Stereo Headphone Function General Description The LM4873 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W to a 4Ω load (Note 1) or 2.4W to a 3Ω load (Note 2)with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode to drive stereo headphones. A Mux Control pin toggles between the two stereo sets of amplifier inputs, allowing for two selectable amplifier closed-loop responses. Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components.