Datasheet4U Logo Datasheet4U.com

LM2648 - Synchronous Step-Down 3-Channel Switching Regulator Controller

📥 Download Datasheet

General Description

The LM2648 consists of two current mode and two voltage mode synchronous buck regulator controllers providing 3 outputs at a switching frequency of 300kHz.

Each pair of switching regulator controllers operate 180˚ out of phase.

Overview

LM2648 Two-Phase, Synchronous Step-Down 3-Channel Switching Regulator Controller December 2004 LM2648 Two-Phase, Synchronous Step-Down 3-Channel Switching Regulator.

Key Features

  • analog soft-start circuitry that is independent of the output load and output capacitance. This makes the soft-start behavior more predictable than traditional soft-start circuits. Sequential startup is built in and requires a single capacitor to set the timing. The LM2648 has over-voltage protection and under-voltage protection for all outputs. Two additional comparator inputs (analog and logic level) are provided to shut down the IC for any user defined protection. The FAULT_DELAY pin allows d.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
Texas Instruments Logo LM26480 1.5-A Buck Regulators and Dual 300-mA LDO Texas Instruments
Texas Instruments Logo LM26480-Q1 1.5-A Buck Regulators and Dual 300-mA LDO Texas Instruments
Texas Instruments Logo LM26484 Power Management Unit Texas Instruments

More Datasheets from National Semiconductor (now Texas Instruments)

Part Number Description
LM2640 Dual Adjustable Step-Down Switching Power-Supply Controller
LM26400Y 500kHz Wide Input Range Buck Regulator
LM2641 Dual Adjustable Step-Down Switching Power Supply Controller
LM2642 Two-Phase Synchronous Step-Down Switching Controller
LM2645 Advanced Two-Phase Switching Controller
LM2647 Dual Synchronous Buck Regulator Controller
LM26 Factory Preset Thermostat
LM260 Voltage Comparators
LM26001 Switching Regulator
LM26001B 1.5A Switching Regulator