Datasheet4U Logo Datasheet4U.com

DS89C386 - Twelve Channel CMOS Differential Line Receiver

General Description

The DS89C386 is a high speed twelve channel CMOS differential receiver that meets the requirements of TIA/ EIA-422-B.

Key Features

  • low power dissipation of 240 mW typical. Each TRI-STATE ® enable, EN, allows the receiver output to be active or in a Hi-impedance off state. Each enable is common to only two receivers for flexibility and multiplexing of receiver outputs. The receiver output (RO) is guaranteed to be High when the inputs are left open and unterminated. The receiver can detect signals as low and including ± 200 mV over the common mode range of ± 7V. The receiver outputs (RO) are compatible with both TTL and CMOS.

📥 Download Datasheet

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS89C387 Twelve Channel CMOS Differential Line Driver
DS89C21 Differential CMOS Line Driver and Receiver Pair
DS8907 Phase-Locked Loop Frequency Synthesizer
DS8911 Sound Up-Conversion Frequency Synthesizer
DS8913 Sound Up-Conversion Frequency Synthesizer
DS8921 Differential Line Driver and Receiver Pair
DS8921A Differential Line Driver and Receiver Pair
DS8921AT Differential Line Driver and Receiver Pair
DS8922 TRI-STATE RS-422 Dual Differential Line Driver and Receiver Pairs
DS8922A RS-422 Dual Differential Line Driver and Receiver Pairs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS89C386 Twelve Channel CMOS Differential Line Receiver May 1995 DS89C386 Twelve Channel CMOS Differential Line Receiver General Description The DS89C386 is a high speed twelve channel CMOS differential receiver that meets the requirements of TIA/ EIA-422-B. The DS89C386 features low power dissipation of 240 mW typical. Each TRI-STATE ® enable, EN, allows the receiver output to be active or in a Hi-impedance off state. Each enable is common to only two receivers for flexibility and multiplexing of receiver outputs. The receiver output (RO) is guaranteed to be High when the inputs are left open and unterminated. The receiver can detect signals as low and including ± 200 mV over the common mode range of ± 7V. The receiver outputs (RO) are compatible with both TTL and CMOS levels.