Datasheet4U Logo Datasheet4U.com

DS36277 - Dominant Mode Multipoint Transceiver

General Description

The DS36277 Dominant Mode Multipoint Transceiver is designed for use on bi-directional differential busses.

It is optimal for use on Interfaces that utilize Society of Automotive Engineers (SAE) J1708 Electrical Standard.

Key Features

  • n.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS36277 Dominant Mode Multipoint Transceiver Texas Instruments
DS3630-945GSE Mini ITX Main Board Manual Advansus
DS3647A Quad Tri-state MOS Memory I/o Register National Semiconductor Corporation
DS3658 Quad High Current Peripheral Driver Texas Instruments
DS3667 3 State Bidirectional Transceiver National

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS36276 FAILSAFE Multipoint Transceiver
DS3628 Octal TRI-STATE MOS Drivers
DS36149 (DS36149 / DS36179) Hex MOS Drivers
DS36179 (DS36149 / DS36179) Hex MOS Drivers
DS3630B Hex CMOS Compatible Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS36277 Dominant Mode Multipoint Transceiver July 1998 DS36277 Dominant Mode Multipoint Transceiver General Description The DS36277 Dominant Mode Multipoint Transceiver is designed for use on bi-directional differential busses. It is optimal for use on Interfaces that utilize Society of Automotive Engineers (SAE) J1708 Electrical Standard. The device is similar to standard TIA/EIA-485 transceivers, but differs in enabling scheme. The Driver’s Input is normally externally tied LOW, thus providing only two states: Active (LOW), or Disabled (OFF). When the driver is active, the dominant mode is LOW, conversely, when the driver is disabled, the bus is pulled HIGH by external bias resistors.