Download the DS25CP114 datasheet PDF.
This datasheet also covers the DS25CP104A variant, as both devices belong to the same (ds25cp104a / ds25cp114) 3.125 gbps 4x4 lvds crosspoint switch family and are provided as variant models within a single manufacturer datasheet.
General Description
The DS25CP104A and DS25CP114 are 3.125 Gbps 4x4 LVDS crosspoint switches optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables.
Fully differential signal paths ensure exceptional signal integrity and noise immunity.
Key Features
DC - 3.125 Gbps low jitter, low skew, low power operation.
Pin and SMBus configurable, fully differential, nonblocking architecture.
Pin (two levels) and SMBus (four levels) selectable preemphasis and equalization eliminate ISI jitter to CML and LVPECL drivers.
Wide Input Common Mode Range enables easy interface.
LOS circuitry detects open inputs fault condition.
On-chip 100Ω input and output termination minimizes
insertion and return losses, reduces component c.
Note: The manufacturer provides a single datasheet file (DS25CP104A_NationalSemiconductor.pdf) that lists specifications for multiple related part numbers.
Full PDF Text Transcription for DS25CP114 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
DS25CP114. For precise diagrams, and layout, please refer to the original PDF.
DS25CP104A / DS25CP114 3.125 Gbps 4x4 LVDS Crosspoint Switch with PE and EQ www.DataSheet4U.com May 13, 2009 DS25CP104A / DS25CP114 3.125 Gbps 4x4 LVDS Crosspoint Switch ...
View more extracted text
13, 2009 DS25CP104A / DS25CP114 3.125 Gbps 4x4 LVDS Crosspoint Switch with Transmit Pre-Emphasis and Receive Equalization General Description The DS25CP104A and DS25CP114 are 3.125 Gbps 4x4 LVDS crosspoint switches optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. The switch configuration can be accomplished via external pins or the System Management Bus (SMBus) interface.
DS25CP114 Datasheet
