Datasheet4U Logo Datasheet4U.com

CLC949 - Very Low-Power/ 12-Bit/ 20MSPS Monolithic A/D Convertter

Description

The Comlinear CLC949 is a 12-bit analog-to-digital converter subsystem including 12-bit quantizer, sample-and-hold amplifier, and internal reference.

The CLC949 has been optimized for low power operation with high dynamic range.

Features

  • s s s s s Very low/programmable power 0.07W @ 5MSPS 0.22W @ 20MSPS 0.40W @ 30MSPS Single supply operation (+5V) 0.5 LSB differential linearity error Wide dynamic range 72dBc spurious-free dynamic range 68dB signal-to-noise ratio No missing codes CCD imaging IR imaging FLIR processing Medical imaging High definition video Instrumentation Radar processing Digital communications.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC935 12-bit/ 15MSPS A/D Converter
CLC952 41MSPS Monolithic A/D Converter
CLC-CAPT-PCASM Data Capture Board Users Guide
CLC001 Serial Digital Cable Driver with Adjustable Outputs
CLC002 SMPTE 292M / 259M Serial Digital Cable Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Comlinear CLC949 Very Low-Power, 12-Bit, 20MSPS Monolithic Converter August 1996 N Comlinear CLC949 Very Low-Power, 12-Bit, 20MSPS Monolithic A/D Convertter General Description The Comlinear CLC949 is a 12-bit analog-to-digital converter subsystem including 12-bit quantizer, sample-and-hold amplifier, and internal reference. The CLC949 has been optimized for low power operation with high dynamic range. The CLC949 has a unique feature which allows the user to adjust internal bias levels in the converter which results in a trade-off between power dissipation and maximum conversion rate. With bias set for 220mW power dissipation the converter operates at 20MSPS. Under these conditions, dynamic performance with a 9.9MHz analog input is typically 68dB SNR and 72dBc SFDR.
Published: |