Datasheet4U Logo Datasheet4U.com

CLC5665 - Low Distortion Amplifier with Disable

Description

The CLC5665 is a low-cost, wideband amplifier that provides very low 2nd and 3rd harmonic distortion at 1MHz (-89/-92dBc).

The great slew rate of 1800V/µs, bandwidth of 90MHz (Av = +1) and fast disable make it an excellent choice for many high speed multiplexing applications.

Features

  • s s s s s s s s s s 0.1dB gain flatness to 20MHz (Av = +2) 90MHz bandwidth (Av = +1) Large signal BW 25MHz 1800V/µs slew rate 0.05%/0.05° differential gain/phase ±5V, ±15V or single supplies 200ns disable to high-impedance output Wide gain range -89/-92dBc HD2/HD3 (RL = 500Ω) Low cost xDSL driver Twisted pair driver Cable driver Video distribution CCD clock driver Multimedia systems DAC output buffers Imaging systems Non-Inverting Frequency Response Av = 1 Rf = 698 Av = 10 Rf = 100 Phase Appli.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC-207 Low Distortion Wideband Op Amp Comlinear Corporation
CLC001 CLC001 Serial Digital Cable Driver with Adjustable Outputs (Rev. B) ETCTI
CLC006 CLC006 Serial Digital Cable Driver with Adjustable Outputs (Rev. G) ETCTI
CLC007 CLC007 Serial Digital Cable Driver with Dual Complementary Outputs (Rev. E) ETCTI
CLC020 CLC020 SMPTE 259M Digital Video Serializer with Integrated Cable Driver (Rev. E) ETCTI

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC5602 Dual/ High Output/ Video Amplifier
CLC5612 Dual/ High Output/ Programmable Gain Buffer
CLC5622 Dual/ High Output/ Video Amplifier
CLC5623 Video Amplifier
CLC5632 Programmable Gain Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CLC5665 Low Distortion Amplifier with Disable June 1999 N CLC5665 Low Distortion Amplifier with Disable General Description The CLC5665 is a low-cost, wideband amplifier that provides very low 2nd and 3rd harmonic distortion at 1MHz (-89/-92dBc). The great slew rate of 1800V/µs, bandwidth of 90MHz (Av = +1) and fast disable make it an excellent choice for many high speed multiplexing applications. Like all current feedback op amps, the CLC5665 allows the frequency response to be optimized (or adjusted) by the selection of the feedback resistor. For demanding video applications, the 0.1dB bandwidth to 20MHz and differential gain/phase of 0.05%/0.05° make the CLC5665 the preferred component for broadcast quality NTSC and PAL video systems.
Published: |