Datasheet4U Logo Datasheet4U.com

CLC436 - 200MHz/ 15V/ Low-Power Voltage Feedback Op Amp

Description

The Comlinear CLC436 is a high-performance, low power, voltage-feedback operational amplifier that has been designed for a wide range of low-cost applications.

The CLC436 is specified to operate from dual ±5V to dual ±15V power supplies.

Features

  • a 150MHz bandwidth and 850V/µs slew rate. Operating from ±15V power supplies, the CLC436 consumes only 69mW (Icc = 2.3mA) to provide a 200MHz unity-gain bandwidth, a very fast 2400V/µs slew rate and 13ns rise/fall times (5V step). At ±15V, the device also provides large signal swings (>20Vpp) to give high dynamic range and signal-to-noise ratio. As a low-power NTSC or PAL video line-driver, the CLC436 delivers low differential gain and phase errors (0.2%, 1.2°) and very high output drive current.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CLC40 Fllstandssensoren Schaltverstarker Baureihe CLC ETC
CLC40-L05 Fllstandssensoren Schaltverstarker Baureihe CLC ETC
CLC40-L15 Fllstandssensoren Schaltverstarker Baureihe CLC ETC
CLC40-L50 Fllstandssensoren Schaltverstarker Baureihe CLC ETC
CLC40-S Fllstandssensoren Schaltverstarker Baureihe CLC ETC

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
CLC430 General Purpose 100MHz Op Amp with Disable
CLC431 Dual Wideband Monolithic Op Amp with Disable
CLC432 Dual Wideband Monolithic Op Amp with Disable
CLC400 Fast Settling/ Wideband Low-Gain Monolithic Op Amp
CLC401 Fast Settling/ Wideband High-Gain Monolithic Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Comlinear CLC436 200MHz, ±15V, Low-Power Voltage Feedback Op Amp August 1996 N Comlinear CLC436 200MHz, ±15V, Low-Power Voltage Feedback Op Amp General Description The Comlinear CLC436 is a high-performance, low power, voltage-feedback operational amplifier that has been designed for a wide range of low-cost applications. The CLC436 is specified to operate from dual ±5V to dual ±15V power supplies. Operating from ±5V supplies, the unity gain stable CLC436 consumes a mere 23mW of power and features a 150MHz bandwidth and 850V/µs slew rate. Operating from ±15V power supplies, the CLC436 consumes only 69mW (Icc = 2.3mA) to provide a 200MHz unity-gain bandwidth, a very fast 2400V/µs slew rate and 13ns rise/fall times (5V step).
Published: |