TDA8787 - 10-bit/ 3.0 V analog-to-digital interface for CCD cameras

Product Overview

NXP

Part number	TDA8787
Manufacturer	NXP
File Size	106.32 KB
Description	10-bit/ 3.0 V analog-to-digital interface for CCD cameras
Datasheet	TDA8787 Datasheet
Additional preview pages of the TDA8787 datasheet.

The TDA8787 is a 10-bit analog-to-digital interface for CCD cameras.

Correlated Double Sampling (CDS), Automatic Gain Control (AGC), 10-bit Analog-to-Digital Converter (ADC) and reference regulator included.
Fully programmable via a 3-wire serial interface.
Sampling frequency up to 18 MHz.
AGC gain range of 36 dB (in steps of 0.1 dB).
Low power consumption of only 190 mW (typ. ).
Power consumption in standby mode of 4.5 mW (typ. ).
3.0 V operation and 2.5 to 3.6 V operation for the digital outputs.

📁 Similar Datasheet

TDA8715 - 8-Bit High-Speed Analog-to-Digital Converter (Philips)
TDA8777 - Triple 10-bit video DAC up to 330 MHz sample frequency (NXP Semiconductors)
TDA8025 - IC card interface (NXP Semiconductors)
TDA8035HN - Smart card interface (NXP Semiconductors)
TDA8060ATS - Satellite ZERO-IF QPSK down-converter (Philips)
TDA8102B - H/V Processor for TTL VDU (ST Microelectronics)
TDA8114 - VCR Processor Interface Circuit (ST Microelectronics)
TDA8115 - Dual Motor Driver (ST Microelectronics)

Other Datasheets by NXP

TDA8787A - analog-to-digital interface
TDA8780M - True logarithmic amplifier
TDA8783 - 40 Msps/ 10-bit analog-to-digital interface for CCD cameras
TDA8784 - 18 Msps/ 10-bit analog-to-digital interface for CCD cameras
TDA8785 - 8-bit high-speed analog-to-digital converter with gain and offset controls
TDA8786 - 10-bit analog-to-digital interface for CCD cameras

Published: Apr 16, 2005 |