TDA8601 - RGB/YUV and fast blanking switch

Product Overview

NXP

TDA8601 RGB/YUV and fast blanking switch by NXP - Datasheet Preview — Datasheet preview – TDA8601

Datasheet Details

Part number	TDA8601
Manufacturer	NXP
File Size	237.11 KB
Description	RGB/YUV and fast blanking switch
Datasheet	TDA8601 Datasheet
Additional preview pages of the TDA8601 datasheet.

Product details

Description

TDA8601 The device is intended for switching between two RGB or YUV video sources.The outputs can be set to a high-impedance state to enable parallel connection of several devices.A HIGH level on SEL (pin 5) selects the video inputs of Channel 2. The IOCNTR control pin (pin 16) defines the 3-state outputs and clamp inputs: HIGH = 3-state outputs (also for test; active clamp) LOW = passive clamp at the video inputs (diode) Sandcastle: the video signal is clamped

Features

YUV/RGB and fast blanking switch.
3-state output.
Selectable clamp:.
passive (with diodes) or.
active clamp.
Bandwidth greater than 22 MHz.
Fully ESD protected.
Latch-up free.

📁 Similar Datasheet

TDA8025 - IC card interface (NXP Semiconductors)
TDA8035HN - Smart card interface (NXP Semiconductors)
TDA8060ATS - Satellite ZERO-IF QPSK down-converter (Philips)
TDA8102B - H/V Processor for TTL VDU (ST Microelectronics)
TDA8114 - VCR Processor Interface Circuit (ST Microelectronics)
TDA8115 - Dual Motor Driver (ST Microelectronics)
TDA8116 - Video Head Servo Controller (ST Microelectronics)
TDA8118 - Control Head Playback & Record Amplifier and Signals Interface (ST Microelectronics)

Other Datasheets by NXP

TDA8000 - Smart card interface
TDA8000T - Smart card interface
TDA8001 - Smart card interface
TDA8002 - IC card interface
TDA8002C - IC card interface
TDA8003TS - I2C-bus SIM card interface

Published: Apr 16, 2005 |