Datasheet4U Logo Datasheet4U.com

TDA8005 - Low-power smart card coupler

General Description

The TDA8005 is a low cost card interface for portable smart card readers.

Controlled through a standard serial interface, it takes care of all ISO 7816 and GSM11-11 requirements.

Key Features

  • VCC generation (5 V ±5%, 20 mA maximum with controlled rise and fall times).
  • Clock generation (up to 8 MHz), with two times synchronous frequency doubling.
  • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode.
  • Specific UART on I/O for automatic direct/inverse convention settings and error management at character level.
  • Automatic activation and deactivation sequences through an independent sequencer.

📥 Download Datasheet

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8005A Low-power 3 V/5 V smart card coupler
TDA8000 Smart card interface
TDA8000T Smart card interface
TDA8001 Smart card interface
TDA8002 IC card interface
TDA8002C IC card interface
TDA8003TS I2C-bus SIM card interface
TDA8004AT IC card interface
TDA8004T IC card interface
TDA8006 Multiprotocol IC Card coupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8005 Low-power smart card coupler Product specification Supersedes data of 1995 Apr 13 File under Integrated Circuits, IC17 1996 Sep 25 Philips Semiconductors Product specification Low-power smart card coupler FEATURES • VCC generation (5 V ±5%, 20 mA maximum with controlled rise and fall times) • Clock generation (up to 8 MHz), with two times synchronous frequency doubling • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode • Specific UART on I/O for automatic direct/inverse convention settings and error management at character level • Automatic activation and deactivation sequences through an independent sequencer • Supports the protocol T = 0 in accordance with ISO 7816, GSM11.