Datasheet4U Logo Datasheet4U.com

SC16IS752 - Dual UART

Description

The SC16IS752/SC16IS762 is an I2C-bus/SPI bus interface to a dual-channel high performance UART offering data rates up to 5 Mbit/s, low operating and sleeping current; it also provides the application with 8 additional programmable I/O pins.

Features

  • 2.1 General features.
  • Dual full-duplex UART.
  • I2C-bus or SPI interface selectable.
  • 3.3 V or 2.5 V operation.
  • Industrial temperature range: 40 C to +95 C.
  • 64 bytes FIFO (transmitter and receiver).
  • Fully compatible with industrial standard 16C450 and equivalent.
  • Baud rates up to 5 Mbit/s in 16 clock mode.
  • Auto hardware flow control using RTS/CTS.
  • Auto software flow control with programmable Xon/Xoff characters.
  • Single or double Xon/Xoff characte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC16IS750 Single UART with I2C-bus/SPI interface NXP Semiconductors
SC16IS740 Single UART with I2C-bus/SPI interface NXP Semiconductors
SC16IS760 Single UART with I2C-bus/SPI interface NXP Semiconductors
SC1601A LCD ETC
SC1601B LCD ETC

Other Datasheets by NXP Semiconductors

Part Number Description
SC16IS741 Single UART with I2C-bus/SPI interface
SC16IS741A Single UART
SC16IS762 Dual UART
SC16C2550 Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder
SC16C2550B dual UART

Full PDF Text Transcription

Click to expand full text
SC16IS752; SC16IS762 Dual UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support Rev. 9 — 22 March 2012 Product data sheet 1. General description The SC16IS752/SC16IS762 is an I2C-bus/SPI bus interface to a dual-channel high performance UART offering data rates up to 5 Mbit/s, low operating and sleeping current; it also provides the application with 8 additional programmable I/O pins. The device comes in very small HVQFN32 and TSSOP28 packages, which makes it ideally suitable for hand-held, battery-operated applications. This chip enables seamless protocol conversion from I2C-bus/SPI to RS-232/RS-485 and is fully bidirectional.
Published: |