Datasheet4U Logo Datasheet4U.com

SAA7367 - Bitstream conversion ADC

Description

The SAA7367 is a CMOS low-cost stereo Analog-to-Digital Converter (ADC) using the Philips bitstream conversion technique.

MAX.

Features

  • Total Harmonic Distortion plus Noise (THD + N) =.
  • 88 dB (0.004%); DR = 93 dB; S/N = 97 dB.
  • Simple interfacing to analog inputs.
  • Small, non-critical PCB layout.
  • Low pin-out SO24 package (pin-compatible to SAA7366).
  • 4 flexible serial interface modes.
  • 4.5 to 5.5 V operation.
  • Standby mode.
  • Detection of digital signal ≥.
  • 1 dB amplitude.
  • Up to 18 significant bits serial output.
  • Selectable high-pas.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SAA7320 Stereo CMOS DAC Philips
SAA7327 Digital servo processor and Compact Disc decoder NXP Semiconductors
SAA7378GP Single Chip Digital Servo Processor and Compact Disc Decoder Philips
SAA7000 Compact Disc Circuit Signetics
SAA7010 Demodulator Signetics

Other Datasheets by NXP Semiconductors

Part Number Description
SAA7360 Bitstream conversion ADC
SAA7366 Bitstream conversion ADC
SAA7310 CMOS decoder for compact disc systems
SAA7322 (SAA7322 / SAA7323) Stereo CMOS Bitstream DAC
SAA7323 (SAA7322 / SAA7323) Stereo CMOS Bitstream DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET SAA7367 Bitstream conversion ADC for digital audio systems Product specification Supersedes data of 1996 Jun 17 File under Integrated Circuits, IC01 1998 Nov 17 Philips Semiconductors Product specification Bitstream conversion ADC for digital audio systems FEATURES • Total Harmonic Distortion plus Noise (THD + N) = −88 dB (0.004%); DR = 93 dB; S/N = 97 dB • Simple interfacing to analog inputs • Small, non-critical PCB layout • Low pin-out SO24 package (pin-compatible to SAA7366) • 4 flexible serial interface modes • 4.5 to 5.5 V operation • Standby mode • Detection of digital signal ≥−1 dB amplitude • Up to 18 significant bits serial output • Selectable high-pass filter.
Published: |