Datasheet4U Logo Datasheet4U.com

NX5P3363 - power switch

Datasheet Summary

Description

The NX5P3363 is a precision adjustable current-limited power switch for USB PD application.

The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs.

Features

  • VIN supply voltage range from 4.0 V to 5.5 V.
  • All time reverse current protection with ultra fast RCP recovery.
  • Adjustable current limit from 400 mA to 3.3 A.
  • Clamped current output in overcurrent condition.
  • 29 V high voltage tolerance on VBUS pin.
  • Low ON resistance of the power FETs: 35 m (typical) in total.
  • Surge protection: IEC61000-4-5 exceeds ±80 V on VBUS.
  • Over temperature protection.
  • Safety approvals.
  • UL 62368-1, 2nd edition, file no. 20.

📥 Download Datasheet

Datasheet preview – NX5P3363

Datasheet Details

Part number NX5P3363
Manufacturer NXP
File Size 1.37 MB
Description power switch
Datasheet download datasheet NX5P3363 Datasheet
Additional preview pages of the NX5P3363 datasheet.

📁 Similar Datasheet

Other Datasheets by NXP
  • NX5P3363-Q100 - USB PD and Type-C current-limited power switch
  • NX5P3001 - Bidirectional high-side power switch
  • NX5P3090 - power switch
  • NX5P3290 - Power Switch
  • NX5P1000 - Logic controlled high-side power switch
  • NX5P1100 - Logic controlled high-side power switch
  • NX5P2090 - Logic controlled high-side power switch
  • NX5P2190 - Logic controlled high-side power switch

Full PDF Text Transcription

Click to expand full text
NX5P3363 USB PD and Type-C current-limited power switch Rev. 1.1 — 7 June 2019 Product data sheet 1. General description The NX5P3363 is a precision adjustable current-limited power switch for USB PD application. The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs. The 29 V tolerance on VBUS pin ensures the device is able to work on a USB PD port; a current limit input (ILIM) pin defines the overcurrent limit threshold; an open-drain fault output (FLT) indicates when a fault condition has occurred. The overcurrent limit threshold can be programmed from 400 mA to 3.3 A, using an external resistor between the ILIM pin and GND pin.
Published: |