Datasheet4U Logo Datasheet4U.com

NX5P1100 - Logic controlled high-side power switch

Datasheet Summary

Description

The NX5P1100 is an advanced power switch and ESD-protection device for USB OTG applications.

It includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits.

Features

  • Wide supply voltage range from 3 V to 5.5 V.
  • 30 V tolerant on VBUS.
  • ISW maximum 1 A continuous current.
  • Very low ON resistance: 100 mī— (maximum) at a supply voltage of 4.0 V.
  • Low-power mode (ground current 20 ī­A typical).
  • 1.8 V control logic.
  • Soft start turn-on slew rate.
  • Protection circuitry.
  • Over-temperature protection.
  • Over-current protection with low current output mode.
  • Reverse bias current/Back drive protection.
  • Overvoltage locko.

📥 Download Datasheet

Datasheet preview – NX5P1100

Datasheet Details

Part number NX5P1100
Manufacturer NXP
File Size 607.07 KB
Description Logic controlled high-side power switch
Datasheet download datasheet NX5P1100 Datasheet
Additional preview pages of the NX5P1100 datasheet.

📁 Similar Datasheet

Other Datasheets by NXP
  • NX5P1000 - Logic controlled high-side power switch
  • NX5P2090 - Logic controlled high-side power switch
  • NX5P2190 - Logic controlled high-side power switch
  • NX5P2553 - Precision adjustable current-limited power switch
  • NX5P2924 - Logic controlled high-side power switch
  • NX5P2924B - Logic controlled high-side power switch
  • NX5P2924C - Logic controlled high-side power switch
  • NX5P2925C - Logic controlled high-side power switch

Full PDF Text Transcription

Click to expand full text
NX5P1100 Logic controlled high-side power switch Rev. 1 — 21 March 2014 Product data sheet 1. General description The NX5P1100 is an advanced power switch and ESD-protection device for USB OTG applications. It includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These circuits are designed to isolate a VBUS OTG voltage source from a VBUS interface pin automatically when a fault condition occurs. The device features two power switch terminals, one input (VINT) and one output (VBUS). It has a current limit input (ILIM) for defining the over-current and in-rush current limit. A voltage detect output (VDET) is used to determine when VINT is in the correct voltage range.
Published: |