Datasheet4U Logo Datasheet4U.com

ISP1105W - Advanced Universal Serial Bus transceivers

General Description

The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev.

1.1.

Key Features

  • s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Integrated bypassable 5 V to 3.3 V voltage regulator for powering via USB VBUS VBUS disconnection indication through VP and VM Used as a USB device transceiver or a USB host transceiver Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Low-power operation Supports an I/O voltage range from 1.65 V to 3.6 V 4 k.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISP1181A Full-speed Universal Serial Bus peripheral controller Philips
ISP1181B Full-speed Universal Serial Bus peripheral controller Philips
ISP1016E High-Density Programmable Logic Lattice Semiconductor
ISP1032E High-Density Programmable Logic Lattice Semiconductor
ISP1032E High-Density Programmable Logic Lattice Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
ISP1105 Advanced Universal Serial Bus transceivers
ISP1102 Advanced Universal Serial Bus transceiver
ISP1102BS Advanced Universal Serial Bus transceiver
ISP1102W Advanced Universal Serial Bus transceiver
ISP1103 Universal Serial Bus transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISP1105/1106/1107 Advanced Universal Serial Bus transceivers Rev. 06 — 30 November 2001 Product data 1. General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS.