Datasheet4U Logo Datasheet4U.com

GTL2002 Datasheet 2-bit bi-directional low voltage translator

Manufacturer: NXP Semiconductors

📥 Download Datasheet

General Description

The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay.

The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF).

The device allows bidirectional voltage translations between 1.0 V and 5.0 V without use of a direction pin.

Overview

GTL2002 2-bit bidirectional low voltage translator Rev.

8 — 19 August 2013 Product data sheet 1.

Key Features

  • 2-bit bidirectional low voltage translator.
  • Allows voltage level translation between 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5 V buses, which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels.
  • Provides bidirectional voltage translation with no direction pin.
  • Low 6.5  ON-state resistance (Ron) between input and output pins (Sn/Dn).
  • Supports hot insertion.
  • No power supply required; will not latch up.
  • 5 V tolerant inputs.
  • Low standb.

More Datasheets from NXP Semiconductors

Part Number Description
GTL2000 22-bit bi-directional low voltage translator
GTL2004 Quad GTL/GTL to LVTTL/TTL bidirectional latched translator
GTL2005 Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator
GTL2006 13-bit GTL-/GTL/GTL+ to LVTTL translator
GTL2007 13-bit GTL to LVTTL translator
GTL2008 (GTL2008 / GTL2107) 12-Bit GTL to LVTTL Transistor
GTL2009 3-bit GTL Front-Side Bus frequency comparator
GTL2010 10-bit GTL Processor Voltage Clamp
GTL2020 32-bit GTL terminator with octal enables
GTL2021 32-bit GTL terminator with octal enables