Datasheet4U Logo Datasheet4U.com

CBTW28DD14 - 14-bit Bus Switch/multiplexer

Datasheet Summary

Description

This 14-bit bus switch/multiplexer (MUX) is designed for 1.5 V or 1.8 V supply voltage operation, POD_12, SSTL_12, SSTL_135, SSTL_15 or SSTL_18 signaling and CMOS select input levels.

It is designed for operation in DDR2, DDR3 or DDR4 memory bus systems.

Features

  • 2.1 Topology.
  • 14-bit bus width.
  • 1 : 2 switch/MUX topology.
  • Bidirectional operation.
  • Simple CMOS select pin (SEL).
  • Simple CMOS enable pin (EN) 2.2 Performance.
  • 2.5 GHz bandwidth.
  • Low ON insertion loss.
  • Low crosstalk.
  • High OFF isolation.
  • POD_12, SSTL_12, SSTL_135, SSTL_15 or SSTL_18 signaling NXP Semiconductors CBTW28DD14 14-bit bus switch/multiplexer for DDR2/DDR3/DDR4.

📥 Download Datasheet

Datasheet preview – CBTW28DD14

Datasheet Details

Part number CBTW28DD14
Manufacturer NXP
File Size 114.24 KB
Description 14-bit Bus Switch/multiplexer
Datasheet download datasheet CBTW28DD14 Datasheet
Additional preview pages of the CBTW28DD14 datasheet.

📁 Similar Datasheet

  • CBT-10 - (CBT-xxx) 2 Hole Base Mounted Terminations (Component General)
  • CBT-10-1 - (CBT-x0-x) 1 Hole Base Mounted Terminations (Component General)
  • CBT-10-2 - (CBT-x0-x) 1 Hole Base Mounted Terminations (Component General)
  • CBT-10-3 - (CBT-x0-x) 1 Hole Base Mounted Terminations (Component General)
  • CBT-10-4 - (CBT-x0-x) 1 Hole Base Mounted Terminations (Component General)
  • CBT-10-5 - (CBT-xxx) 2 Hole Base Mounted Terminations (Component General)
  • CBT-120-UV - LEDs (Luminus)
  • CBT-125 - (CBT-xxx) 2 Hole Base Mounted Terminations (Component General)
  • CBT-150 - (CBT-xxx) 2 Hole Base Mounted Terminations (Component General)
  • CBT-150-1 - (CBT-xxx) 2 Hole Base Mounted Terminations (Component General)
Other Datasheets by NXP
  • CBT16211 - OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
  • CBT16212 - 24-bit bus exchange switch
  • CBT16292 - 12-bit 1-of-2 multiplexer/demultiplexer
  • CBT3125 - Quadruple FET bus switch
  • CBT3244 - Octal bus switch with Quad Output Enables
  • CBT3245 - Octal bus switch with output enable
  • CBT3245A - Octal bus switch
  • CBT3253 - Dual 1-of-4 FET multiplexer/demultiplexer

Full PDF Text Transcription

Click to expand full text
CBTW28DD14 14-bit bus switch/multiplexer for DDR2/DDR3/DDR4 applications Rev. 7.1 — 3 August 2015 Product data sheet 1. General description This 14-bit bus switch/multiplexer (MUX) is designed for 1.5 V or 1.8 V supply voltage operation, POD_12, SSTL_12, SSTL_135, SSTL_15 or SSTL_18 signaling and CMOS select input levels. It is designed for operation in DDR2, DDR3 or DDR4 memory bus systems. The CBTW28DD14 has a 1 : 2 switch or 2 : 1 multiplex topology and offers a 14-bit wide bus. Each 14-bit wide A-port can be switched to one of two ports B and C, for all bits simultaneously. The selection of the port is by a simple CMOS input (SELect). Another CMOS input (ENable) is available to allow all ports to be disconnected.
Published: |