Datasheet4U Logo Datasheet4U.com

BGX7100 - Transmitter IQ modulator

Description

The BGX7100 device combines high performance, high linearity I and Q modulation paths for use in radio frequency up-conversion.

It supports RF frequency outputs in the range from 400 MHz to 4000 MHz.

The BGX7100 IQ modulator is performance independent of the IQ common mode voltage.

Features

  • 400 MHz to 4000 MHz frequency operating range Stable performance across 0.25 V to 3.3 V common-mode voltage input Independent low-current power-down hardware control pin 12 dBm output 1 dB compression point 27 dBm output third-order intercept point (typical) Integrated active biasing Single 5 V supply 180  differential IQ input impedance Matched 50  single-ended RF output impedance ESD protection at all pins www. DataSheet. net/ 3. Ap.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BGX13P Blue Gecko Bluetooth-Module Silicon Laboratories
BGX13S Blue Gecko Xpress Bluetooth SiP-Module Silicon Laboratories
BGX400 Silicon Switching Diodes Infineon Technologies AG
BGX50A Silicon Switching Diode Array Siemens Semiconductor Group
BGX50A Silicon Switching Diode Array Infineon Technologies AG

Other Datasheets by NXP Semiconductors

Part Number Description
BGX7101 Transmitter IQ modulator
BGX7220 Dual receiver down mixer
BGX7221 Dual receiver down mixer
BGX881 CATV amplifier
BGX885N CATV amplifier

Full PDF Text Transcription

Click to expand full text
3D BGX7100 HV Transmitter IQ modulator Rev. 5 — 3 September 2012 Product data sheet 1. General description The BGX7100 device combines high performance, high linearity I and Q modulation paths for use in radio frequency up-conversion. It supports RF frequency outputs in the range from 400 MHz to 4000 MHz. The BGX7100 IQ modulator is performance independent of the IQ common mode voltage. The modulator provides a typical output power at 1 dB gain compression (PL(1dB)) value of 12 dBm and a typical 27 dBm output third-order intercept point (IP3o). Unadjusted sideband suppression and carrier feedthrough are 50 dBc and 45 dBm respectively. A hardware control pin provides a fast power-down/power-up mode functionality which allows significant power saving. 2.
Published: |